Beldon vs Burns Beach

Name: Water Quality Comparison: Beldon vs Burns Beach
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Beldon, WA

9.2

Quality Score

Supplied by Water Corporation

Burns Beach, WA

9.1

Quality Score

Supplied by Water Corporation

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Beldon scores 9.2/10 and Burns Beach scores 9.1/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Burns Beach's water is hard at 190 mg/L — you're cleaning scale off things that shouldn't need cleaning.

At this level, you'll see white rings inside the kettle, cloudy spots on glassware, and shampoo that never lathers properly. Over 5–10 years, scale slowly kills heating elements in your hot water system and dishwasher — the damage is invisible until they fail 2–3 years early. Boiling doesn't help; it concentrates the minerals.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

An under-sink reverse-osmosis tap gives you clean, soft drinking water without re-plumbing the whole house. The kettle stops scaling. Tea tastes like tea. No more bottled water runs. Fits on standard 15mm pipework, installs in a Saturday.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Beldon, WA

Burns Beach, WA

Key metrics comparison

Hardness (mg/L)

Beldon

125 Lower

Burns Beach

190 Higher

pH Level

Beldon

7.54 Normal

Burns Beach

7.61 Normal

Fluoride (mg/L)

Beldon

0.8 Lower

Burns Beach

0.86 Higher

Chlorine (mg/L)

Beldon

—

Burns Beach

—

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Beldon	Burns Beach	Unit	ADWG Guideline
Alkalinity	108 Measured	155 Measured	mg/L CaCO3	No limit
Aluminium	0.01 Good	0.008 Good	mg/L	< 0.2
Chloride	160 Good	171 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Fluoride	0.8 Good	0.86 Good	mg/L	< 1.5
Hardness	125 Good	190 Near limit	mg/L CaCO3	< 200
Iron	0.016 Good	0.016 Good	mg/L	< 0.3
Manganese	0.004 Good	0.004 Good	mg/L	< 0.1
Nitrate	3.1 Good	7 Good	mg/L	< 50
pH	7.54 Normal	7.61 Normal	pH units	6.5 – 8.5
Sodium	93 Good	92 Good	mg/L	< 180
Sulfate	23 Good	15 Good	mg/L	< 500
Total Dissolved Solids	480 Good	572 Near limit	mg/L	< 600
Trihalomethanes	0.106 Good	0.058 Good	mg/L	< 0.25
Turbidity	0.1 Good	0.2 Good	NTU	< 5

Explore further

Beldon

Burns Beach

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Water Corporation. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.