Elizabeth Hills vs Mount Vernon

Name: Water Quality Comparison: Elizabeth Hills vs Mount Vernon
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Elizabeth Hills, NSW

9.6

Quality Score

Supplied by Sydney Water

Mount Vernon, NSW

9.5

Quality Score

Supplied by Sydney Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Elizabeth Hills scores 9.6/10 and Mount Vernon scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Fluoride in Elizabeth Hills is 1.01 mg/L — above the 1.0 mg/L threshold. If you want it out, a carbon pitcher won't do it.

This is the fluoride mistake almost every family makes: they buy a Brita or a basic tap filter, assume it's handling fluoride, and it isn't. Activated carbon doesn't touch fluoride ions. Neither does boiling — that actually concentrates it. Reverse osmosis (85–95% removal) and activated alumina are the only two consumer technologies that measurably reduce fluoride at the tap.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A 6-stage RO system drops fluoride from 1.01 mg/L down to near-zero, and handles chlorine, lead and dissolved solids at the same time. Under-sink mount, its own tap on the bench.

Remove fluoride →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Elizabeth Hills, NSW

Mount Vernon, NSW

Key metrics comparison

Hardness (mg/L)

Elizabeth Hills

30.5 Lower

Mount Vernon

50.7 Higher

pH Level

Elizabeth Hills

7.7 Normal

Mount Vernon

7.9 Normal

Fluoride (mg/L)

Elizabeth Hills

1.01 Same

Mount Vernon

1.01 Same

Chlorine (mg/L)

Elizabeth Hills

1.08 Higher

Mount Vernon

0.04 Lower

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Elizabeth Hills	Mount Vernon	Unit	ADWG Guideline
Aluminium	0.023 Good	0.014 Good	mg/L	< 0.2
Ammonia	0.001 Measured	0.354 Measured	mg/L	No limit
Chloride	0.004 Good	0.004 Good	mg/L	< 250
Colour	2 Good	4 Good	HU	< 15
Copper	0.005 Good	0.015 Good	mg/L	< 2
Dissolved Oxygen	94.8 Measured	105.1 Measured	% saturation	No limit
E. coli	0 Compliant	0 Compliant	orgs/100 mL	< 0
Fluoride	1.01 Good	1.01 Good	mg/L	< 1.5
Free Chlorine	1.08 Good	0.04 Good	mg/L	< 5
Hardness	30.5 Good	50.7 Good	mg/L	< 200
Iron	0.018 Good	0.007 Good	mg/L	< 0.3
Manganese	0.0014 Good	0.0018 Good	mg/L	< 0.1
Monochloramine	0.09 Good	1.74 Good	mg/L	< 3
Ndma	0.0001 Measured	0.0001 Measured	mg/L	No limit
PFOA	0.0001 Good	0.0002 Good	µg/L	< 0.2
PFOS + PFHxS	0.0001 Good	0.0014 Good	µg/L	PFOS < 0.008, PFHxS < 0.03
pH	7.7 Normal	7.9 Normal	pH units	6.5 – 8.5
Sulfate	1.7 Good	8.8 Good	mg/L	< 500
Temperature	18.5 Measured	19.3 Measured	degrees C	No limit
Total Dissolved Solids	65.3 Good	137 Good	mg/L	< 600
Trihalomethanes	0.07 Good	0.09 Good	mg/L	< 0.25
Turbidity	0.12 Good	0.12 Good	NTU	< 5
Zinc	0.005 Measured	0.003 Measured	mg/L	No limit

Explore further

Elizabeth Hills

Mount Vernon

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Sydney Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.