Freemans Reach vs Pitt Town Bottoms

Name: Water Quality Comparison: Freemans Reach vs Pitt Town Bottoms
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Freemans Reach, NSW

9.6

Quality Score

Supplied by Sydney Water

Pitt Town Bottoms, NSW

9.5

Quality Score

Supplied by Sydney Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Freemans Reach scores 9.6/10 and Pitt Town Bottoms scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Fluoride in Freemans Reach is 1.03 mg/L — above the 1.0 mg/L threshold. If you want it out, a carbon pitcher won't do it.

This is the fluoride mistake almost every family makes: they buy a Brita or a basic tap filter, assume it's handling fluoride, and it isn't. Activated carbon doesn't touch fluoride ions. Neither does boiling — that actually concentrates it. Reverse osmosis (85–95% removal) and activated alumina are the only two consumer technologies that measurably reduce fluoride at the tap.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A 6-stage RO system drops fluoride from 1.03 mg/L down to near-zero, and handles chlorine, lead and dissolved solids at the same time. Under-sink mount, its own tap on the bench.

Remove fluoride →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Freemans Reach, NSW

Pitt Town Bottoms, NSW

Key metrics comparison

Hardness (mg/L)

Freemans Reach

39.1 Lower

Pitt Town Bottoms

49.9 Higher

pH Level

Freemans Reach

7.8 Normal

Pitt Town Bottoms

7.9 Normal

Fluoride (mg/L)

Freemans Reach

1.03 Higher

Pitt Town Bottoms

1.01 Lower

Chlorine (mg/L)

Freemans Reach

1.13 Higher

Pitt Town Bottoms

0.04 Lower

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Freemans Reach	Pitt Town Bottoms	Unit	ADWG Guideline
Aluminium	0.01 Good	0.013 Good	mg/L	< 0.2
Ammonia	0.001 Measured	0.226 Measured	mg/L	No limit
Chloride	0.004 Good	0.004 Good	mg/L	< 250
Colour	2 Good	3 Good	HU	< 15
Copper	0.014 Good	0.019 Good	mg/L	< 2
Dissolved Oxygen	85.1 Measured	102.7 Measured	% saturation	No limit
E. coli	0 Compliant	0 Compliant	orgs/100 mL	< 0
Fluoride	1.03 Good	1.01 Good	mg/L	< 1.5
Free Chlorine	1.13 Good	0.04 Good	mg/L	< 5
Hardness	39.1 Good	49.9 Good	mg/L	< 200
Iron	0.018 Good	0.006 Good	mg/L	< 0.3
Manganese	0.0005 Good	0.0017 Good	mg/L	< 0.1
Monochloramine	0.07 Good	1.74 Good	mg/L	< 3
Ndma	0.0001 Measured	0.0001 Measured	mg/L	No limit
PFOA	0.0009 Good	0.0002 Good	µg/L	< 0.2
PFOS + PFHxS	0.0028 Good	0.0014 Good	µg/L	PFOS < 0.008, PFHxS < 0.03
pH	7.8 Normal	7.9 Normal	pH units	6.5 – 8.5
Sulfate	10.4 Good	8.8 Good	mg/L	< 500
Temperature	20.9 Measured	19 Measured	degrees C	No limit
Total Dissolved Solids	145 Good	137 Good	mg/L	< 600
Trihalomethanes	0.04 Good	0.09 Good	mg/L	< 0.25
Turbidity	0.15 Good	0.11 Good	NTU	< 5
Zinc	0.004 Measured	0.002 Measured	mg/L	No limit

Explore further

Freemans Reach

Pitt Town Bottoms

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Sydney Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.