Glebe vs Pyrmont

Name: Water Quality Comparison: Glebe vs Pyrmont
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Glebe, NSW

9.5

Quality Score

Supplied by Sydney Water

Pyrmont, NSW

9.5

Quality Score

Supplied by Sydney Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Glebe scores 9.5/10 and Pyrmont scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Fluoride in Glebe is 1.01 mg/L — above the 1.0 mg/L threshold. If you want it out, a carbon pitcher won't do it.

This is the fluoride mistake almost every family makes: they buy a Brita or a basic tap filter, assume it's handling fluoride, and it isn't. Activated carbon doesn't touch fluoride ions. Neither does boiling — that actually concentrates it. Reverse osmosis (85–95% removal) and activated alumina are the only two consumer technologies that measurably reduce fluoride at the tap.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A 6-stage RO system drops fluoride from 1.01 mg/L down to near-zero, and handles chlorine, lead and dissolved solids at the same time. Under-sink mount, its own tap on the bench.

Remove fluoride →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Glebe, NSW

Pyrmont, NSW

Key metrics comparison

Hardness (mg/L)

Glebe

51.8 Higher

Pyrmont

49.3 Lower

pH Level

Glebe

7.9 Normal

Pyrmont

7.8 Normal

Fluoride (mg/L)

Glebe

1.01 Same

Pyrmont

1.01 Same

Chlorine (mg/L)

Glebe

0.04 Same

Pyrmont

0.04 Same

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Glebe	Pyrmont	Unit	ADWG Guideline
Aluminium	0.014 Good	0.013 Good	mg/L	< 0.2
Ammonia	0.3 Measured	0.177 Measured	mg/L	No limit
Chloride	0.004 Good	0.004 Good	mg/L	< 250
Colour	4 Good	4 Good	HU	< 15
Copper	0.014 Good	0.035 Good	mg/L	< 2
Dissolved Oxygen	108.5 Measured	107.2 Measured	% saturation	No limit
E. coli	0 Compliant	0 Compliant	orgs/100 mL	< 0
Fluoride	1.01 Good	1.01 Good	mg/L	< 1.5
Free Chlorine	0.04 Good	0.04 Good	mg/L	< 5
Hardness	51.8 Good	49.3 Good	mg/L	< 200
Iron	0.008 Good	0.006 Good	mg/L	< 0.3
Manganese	0.0021 Good	0.0014 Good	mg/L	< 0.1
Monochloramine	1.74 Good	1.74 Good	mg/L	< 3
Ndma	0.0001 Measured	0.0001 Measured	mg/L	No limit
PFOA	0.0002 Good	0.0002 Good	µg/L	< 0.56
Pfos Pfhxs	0.0014 Measured	0.0014 Measured	µg/L	No limit
pH	7.9 Normal	7.8 Normal	pH units	6.5 – 8.5
Sulfate	8.8 Good	8.8 Good	mg/L	< 500
Temperature	19.5 Measured	19.5 Measured	degrees C	No limit
Total Dissolved Solids	137 Good	137 Good	mg/L	< 600
Trihalomethanes	0.09 Good	0.09 Good	mg/L	< 0.25
Turbidity	0.1 Good	0.13 Good	NTU	< 5
Zinc	0.002 Measured	0.009 Measured	mg/L	No limit

Explore further

Glebe

Pyrmont

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Sydney Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.