Maylands vs Rivervale
Side-by-side tap water quality comparison
Which suburb has better water?
It's very close! Maylands scores 9.0/10 and Rivervale scores 9.1/10. Both suburbs have similar water quality based on ADWG compliance data.
Visual comparison
Key metrics comparison
Full water quality comparison
All parameters compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Maylands | Rivervale | Unit | ADWG Guideline |
|---|---|---|---|---|
| Alkalinity | 120 Measured | 107 Measured | mg/L CaCO3 | No limit |
| Aluminium | 0.008 Good | 0.008 Good | mg/L | < 0.2 |
| Chloride | 188 Good | 160 Good | mg/L | < 250 |
| Colour | 1 Good | 1 Good | HU | < 15 |
| Fluoride | 0.86 Good | 0.84 Good | mg/L | < 1.5 |
| Hardness | 108 Good | 94 Good | mg/L CaCO3 | < 200 |
| Iron | 0.023 Good | 0.02 Good | mg/L | < 0.3 |
| Manganese | 0.003 Good | 0.003 Good | mg/L | < 0.1 |
| Nitrate | 1.3 Good | 1.3 Good | mg/L | < 50 |
| pH | 7.86 Normal | 7.85 Normal | pH units | 6.5 – 8.5 |
| Sodium | 123 Good | 108 Good | mg/L | < 180 |
| Sulfate | 27 Good | 23 Good | mg/L | < 500 |
| Total Dissolved Solids | 554 Near limit | 477 Good | mg/L | < 600 |
| Trihalomethanes | 0.11 Good | 0.118 Good | mg/L | < 0.25 |
| Turbidity | 0.1 Good | 0.1 Good | NTU | < 5 |
Explore further
Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Water Corporation. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.