Parramatta vs Richmond

Name: Water Quality Comparison: Parramatta vs Richmond
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Parramatta, NSW

9.5

Quality Score

Supplied by Sydney Water

Richmond, VIC

9.5

Quality Score

Supplied by Greater Western Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Parramatta scores 9.5/10 and Richmond scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Chlorine in Richmond is 0.65 mg/L — above the taste threshold. That pool smell in every glass is real.

Chlorine is added on purpose (kills bugs in the pipes), but by the time it reaches your tap it ruins everything you taste. Tea takes on a medicinal edge. Kids turn down water and drink juice or soft drink instead. The usual family fix is bottled water, but a simple carbon filter is the cleaner daily habit. Worse, many filter pitchers go in the fridge and get ignored because they're slow.

BRITAOur pick

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

A BRITA Marella is the opposite: fast (2.4L, fills in under a minute), kid-friendly handle, fridge-door fit, replacement cartridges available everywhere in AU. Chlorine gone, taste clean, no plumber, no faff — this is the default answer for chlorine taste in Australia.

Kill the taste →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Parramatta, NSW

Richmond, VIC

Key metrics comparison

Hardness (mg/L)

Parramatta

49.9 Higher

Richmond

16 Lower

pH Level

Parramatta

7.9 Normal

Richmond

7.4 Normal

Fluoride (mg/L)

Parramatta

1.01 Higher

Richmond

0.79 Lower

Chlorine (mg/L)

Parramatta

0.04 Lower

Richmond

0.65 Higher

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Parramatta	Richmond	Unit	ADWG Guideline
Aluminium	0.013 Good	—	mg/L	< 0.2
Ammonia	0.226 Measured	—	mg/L	No limit
Chloride	0.004 Good	—	mg/L	< 250
Colour	3 Good	2 Good	HU	< 15
Copper	0.019 Good	—	mg/L	< 2
Dissolved Oxygen	102.7 Measured	—	% saturation	No limit
E. coli	0 Compliant	0 Compliant	orgs/100 mL	< 0
Electrical Conductivity	—	65 Measured		No limit
Fluoride	1.01 Good	0.79 Good	mg/L	< 1.5
Free Chlorine	0.04 Good	0.65 Good	mg/L	< 5
Hardness	49.9 Good	16 Good	mg/L	< 200
Iron	0.006 Good	0.06 Good	mg/L	< 0.3
Manganese	0.0017 Good	0.004 Good	mg/L	< 0.1
Monochloramine	1.74 Good	—	mg/L	< 3
Ndma	0.0001 Measured	—	mg/L	No limit
PFOA	0.0002 Good	—	µg/L	< 0.2
PFOS + PFHxS	0.0014 Good	—	µg/L	PFOS < 0.008, PFHxS < 0.03
pH	7.9 Normal	7.4 Normal	pH units	6.5 – 8.5
Sodium	—	4.9 Good	mg/L	< 180
Sulfate	8.8 Good	—	mg/L	< 500
Temperature	19 Measured	—	degrees C	No limit
Total Chlorine	—	0.8 Good	mg/L	< 5
Total Dissolved Solids	137 Good	—	mg/L	< 600
Trihalomethanes	0.09 Good	0.063 Good	mg/L	< 0.25
Turbidity	0.11 Good	0.8 Good	NTU	< 5
Zinc	0.002 Measured	—	mg/L	No limit

Explore further

Parramatta

Richmond

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Sydney Water and Greater Western Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.