Logan Council Tap Water Quality
Water quality data for 1 suburbs in Logan Council, QLD
Key facts about Logan Council water
- • Water hardness: moderately hard (70 mg/L)
- • pH level: 20.9 — outside the ADWG guideline range (6.5–8.5)
- • Fluoridation: Yes (avg 0.90 mg/L)
- • Water utilities: 1 serving this area
- • Suburbs covered: 1
- • Overall: Generally moderate water quality
Avg. Hardness
70.2 mg/L
Warning Avg. pH
20.9
Poor Avg. Fluoride
0.9 mg/L
Good Suburbs Covered
1
Utilities
Water utilities serving Logan Council
Logan Council's tap water is supplied by Logan Council.
Suburbs
All suburbs in Logan Council
1 suburbs with water quality data
Disclaimer: Information on this page is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Logan Council. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.