Tap Water Quality in Wagtail Grove, QLD
Postcode 4513 · Supplied by Unitywater via Moreton
Quality Score
About Wagtail Grove
Wagtail Grove is a suburb in Queensland, Australia (postcode 4513). It falls within the Unitywater area. Neighbouring suburbs include Greenstone, Corymbia, Lilywood, Waraba.
Tap water in Wagtail Grove is supplied by Unitywater. The suburb receives water via the Moreton, Unitywater System supply zones.
Water quality summary
Based on recent water quality reports, Wagtail Grove achieves a WaterScore of 9.5 out of 10, rated excellent overall. Water hardness measures 53 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The water is fluoridated at 0.81 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.4 mg/L — well within the ADWG guideline of 5 mg/L. Turbidity is 0.3 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Greenstone , Corymbia , Lilywood
Recommended filters for Wagtail Grove
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Wagtail Grove's water profile.
ZeroWater
23-Cup Dispenser (incl. TDS Meter)
4.3 · 27,123 ratings on Amazon
A reliable 23-cup dispenser (incl. tds meter) suitable for Wagtail Grove's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Wagtail Grove's water profile.
Comparison
How Wagtail Grove compares
Compared to Queensland and national averages
| Metric | Wagtail Grove | QLD Avg | National Avg |
|---|---|---|---|
| Hardness | 53 mg/L | 74.8 mg/L | 85.1 mg/L |
| pH | — | 6.2 | 7.8 |
| Fluoride | 0.81 mg/L | 0.8 mg/L | 0.7 mg/L |
| Chlorine | 0.4 mg/L | — | — |
| Turbidity | 0.3 NTU | 0.3 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Fluoride | 0.81 | mg/L | < 1.5 | Good |
| Free Chlorine | 0.4 | mg/L | < 5 | Good |
| Monochloramine | 2.5 | mg/L | < 3 | Near limit |
| Total Chlorine | 2.3 | mg/L | < 5 | Good |
| Bromate | 0.005 | mg/L | No limit | Measured |
| Chlorate | 0.14 | mg/L | No limit | Measured |
| Arsenic | 0.0005 | mg/L | No limit | Measured |
| Cadmium | 0.0001 | mg/L | No limit | Measured |
| Chromium | 0.001 | mg/L | No limit | Measured |
| Copper | 0.001 | mg/L | < 2 | Good |
| Lead | 0.001 | mg/L | < 0.01 | Good |
| Manganese | 0.001 | mg/L | < 0.1 | Good |
| Mercury | 0.0001 | mg/L | No limit | Measured |
| Nickel | 0.001 | mg/L | No limit | Measured |
| E. coli | 0 | CFU/100mL | < 0 | Compliant |
| Nitrate | 0.116 | mg/L | < 50 | Good |
| Nitrite | 0.019 | mg/L | No limit | Measured |
| Trihalomethanes | 0.0608 | mg/L | < 0.25 | Good |
| Chloride | 7.3 | mg/L | < 250 | Good |
| Hardness | 53 | mg/L | < 200 | Good |
| Sodium | 20.8 | mg/L | < 180 | Good |
| Aluminium | 0.024 | mg/L | < 0.2 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Zinc | 0.005 | mg/L | No limit | Measured |
| Colour | 1 | HU | < 15 | Good |
| Turbidity | 0.3 | NTU | < 5 | Good |
| Calcium | 11.8 | mg/L | No limit | Measured |
| Magnesium | 5.75 | mg/L | No limit | Measured |
| Alkalinity | 59.5 | mg/L | No limit | Measured |
| Conductivity | 270.8 | µS/cm | No limit | Measured |
| Temperature | 27.4 | °C | No limit | Measured |
| Ndma | 0.003 | µg/L | No limit | Measured |
Safety
Safety assessment
Based on 32 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (53 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Data unavailable
pH Level
pH data is not currently available for Wagtail Grove.
Fluoridated
Fluoride
Fluoride at 0.81 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 0.4 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Wagtail Grove measures 0.4 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Wagtail Grove's water is soft at 53 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.81 mg/L in Wagtail Grove. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Wagtail Grove's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Wagtail Grove?
How hard is the water in Wagtail Grove?
What water utility supplies Wagtail Grove?
Does Wagtail Grove water have fluoride?
What is the water quality score for Wagtail Grove?
Supplier
Water utility
- Utility
- Unitywater
- Supply Zone
- Moreton
- Data Source
- Unitywater — Moreton
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.5 and 10.0
Utility reports average the grid — not your home
Wagtail Grove's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Related
Explore more
Related pages for Wagtail Grove, QLD
Is tap water safe?
Safety assessment
Water hardness
53 mg/L
Best water filter
Filter recommendations
Queensland water quality
State coverage
Unitywater
Water utility
Compare with Greenstone
Wagtail Grove vs Greenstone
Compare with Corymbia
Wagtail Grove vs Corymbia
Compare with Lilywood
Wagtail Grove vs Lilywood
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Unitywater (annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.