Albany Creek vs Tweed Heads
Side-by-side tap water quality comparison
Which suburb has better water?
Albany Creek has better water quality with a score of 9.5/10 compared to Tweed Heads's 9.0/10. Tweed Heads has softer water (33.9 vs 53 mg/L).
Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.
Visual comparison
Key metrics comparison
Full water quality comparison
All parameters compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Albany Creek | Tweed Heads | Unit | ADWG Guideline |
|---|---|---|---|---|
| Alkalinity | 59.5 Measured | 29.5 Measured | mg/L | No limit |
| Aluminium | 0.024 Good | 0.013 Good | mg/L | < 0.2 |
| Arsenic | 0.0005 Measured | 0.0005 Measured | mg/L | No limit |
| Bromate | 0.005 Measured | 0.005 Measured | mg/L | No limit |
| Cadmium | 0.0001 Measured | 0.0001 Measured | mg/L | No limit |
| Calcium | 11.8 Measured | 12.5 Measured | mg/L | No limit |
| Chlorate | 0.14 Measured | 0.066 Measured | mg/L | No limit |
| Chloride | 7.3 Good | 25.7 Good | mg/L | < 250 |
| Chromium | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Colour | 1 Good | 1.3 Good | HU | < 15 |
| Conductivity | 270.8 Measured | 197.5 Measured | µS/cm | No limit |
| Copper | 0.001 Good | 0.001 Good | mg/L | < 2 |
| E. coli | 0 Compliant | 0 Compliant | CFU/100mL | < 0 |
| Fluoride | 0.81 Good | 0.81 Good | mg/L | < 1.5 |
| Free Chlorine | 0.4 Good | 1.7 Good | mg/L | < 5 |
| Hardness | 53 Good | 33.9 Good | mg/L | < 200 |
| Iron | 0.01 Good | 0.01 Good | mg/L | < 0.3 |
| Lead | 0.001 Good | 0.001 Good | mg/L | < 0.01 |
| Magnesium | 5.75 Measured | 0.7 Measured | mg/L | No limit |
| Manganese | 0.001 Good | 0.001 Good | mg/L | < 0.1 |
| Mercury | 0.0001 Measured | 0.0001 Measured | mg/L | No limit |
| Monochloramine | 2.5 Near limit | — | mg/L | < 3 |
| Ndma | 0.003 Measured | 0.003 Measured | µg/L | No limit |
| Nickel | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Nitrate | 0.116 Good | — | mg/L | < 50 |
| Nitrite | 0.019 Measured | — | mg/L | No limit |
| pH | — | 6.2 Outside range | mg/L | 6.5 – 8.5 |
| Sodium | 20.8 Good | 18.3 Good | mg/L | < 180 |
| Temperature | 27.4 Measured | 25 Measured | °C | No limit |
| Total Chlorine | 2.3 Good | 1.6 Good | mg/L | < 5 |
| Trihalomethanes | 0.0608 Good | 0.0396 Good | mg/L | < 0.25 |
| Turbidity | 0.3 Good | 0.3 Good | NTU | < 5 |
| Zinc | 0.005 Measured | 0.005 Measured | mg/L | No limit |
Explore further
Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Seqwater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.