Armadale vs Hawksburn

Name: Water Quality Comparison: Armadale vs Hawksburn
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Armadale, VIC

9.4

Quality Score

Supplied by Yarra Valley Water

Hawksburn, VIC

9.5

Quality Score

Supplied by Yarra Valley Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Armadale scores 9.4/10 and Hawksburn scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Chlorine in Hawksburn is 0.65 mg/L — above the taste threshold. That pool smell in every glass is real.

Chlorine is added on purpose (kills bugs in the pipes), but by the time it reaches your tap it ruins everything you taste. Tea takes on a medicinal edge. Kids turn down water and drink juice or soft drink instead. The usual family fix is bottled water, but a simple carbon filter is the cleaner daily habit. Worse, many filter pitchers go in the fridge and get ignored because they're slow.

BRITAOur pick

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

A BRITA Marella is the opposite: fast (2.4L, fills in under a minute), kid-friendly handle, fridge-door fit, replacement cartridges available everywhere in AU. Chlorine gone, taste clean, no plumber, no faff — this is the default answer for chlorine taste in Australia.

Kill the taste →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Armadale, VIC

Hawksburn, VIC

Key metrics comparison

Hardness (mg/L)

Armadale

19 Higher

Hawksburn

16 Lower

pH Level

Armadale

7.2 Normal

Hawksburn

7.4 Normal

Fluoride (mg/L)

Armadale

0.77 Lower

Hawksburn

0.79 Higher

Chlorine (mg/L)

Armadale

0.46 Lower

Hawksburn

0.65 Higher

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Armadale	Hawksburn	Unit	ADWG Guideline
Colour	7.2 Good	2 Good	HU	< 15
Copper	0.018 Good	—	mg/L	< 2
E. coli	0 Compliant	0 Compliant	MPN/100mL	< 0
Electrical Conductivity	65 Measured	65 Measured		No limit
Fluoride	0.77 Good	0.79 Good	mg/L	< 1.5
Free Chlorine	0.46 Good	0.65 Good	mg/L	< 5
Hardness	19 Good	16 Good	mg/L CaCO3	< 200
Iron	0.049 Good	0.06 Good	mg/L	< 0.3
Lead	0.0004 Good	—	mg/L	< 0.01
Manganese	0.004 Good	0.004 Good	mg/L	< 0.1
pH	7.2 Normal	7.4 Normal	pH units	6.5 – 8.5
Sodium	4.9 Good	4.9 Good	mg/L	< 180
Total Chlorine	0.8 Good	0.8 Good	mg/L	< 5
Trihalomethanes	0.05 Good	0.063 Good	mg/L	< 0.25
Turbidity	2.24 Good	0.8 Good	NTU	< 5
Zinc	0.005 Measured	—	mg/L	No limit

Explore further

Armadale

Hawksburn

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Yarra Valley Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.