Blinman vs Flinders Ranges

Name: Water Quality Comparison: Blinman vs Flinders Ranges
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Flinders Ranges, SA

9.6

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

Flinders Ranges has better water quality with a score of 9.6/10 compared to Blinman's 9.1/10. Flinders Ranges has softer water (89 vs 288 mg/L).

Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Blinman's tap water is 'very hard' at 288 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Blinman, SA

Flinders Ranges, SA

Key metrics comparison

Hardness (mg/L)

Blinman

288 Higher

Flinders Ranges

89 Lower

pH Level

Blinman

—

Flinders Ranges

—

Fluoride (mg/L)

Blinman

0.6 Higher

Flinders Ranges

0.1 Lower

Chlorine (mg/L)

Blinman

1 Lower

Flinders Ranges

1.1 Higher

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Blinman	Flinders Ranges	Unit	ADWG Guideline
Alkalinity	204 Measured	76 Measured	mg/L	No limit
Aluminium	0.002 Good	0.006 Good	mg/L	< 0.2
Calcium	55.2 Measured	14.2 Measured	mg/L	No limit
Chloride	276 Exceeds	93 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.021 Good	0.003 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.6 Good	0.1 Good	mg/L	< 1.5
Free Chlorine	1 Good	1.1 Good	mg/L	< 5
Hardness	288 Exceeds	89 Good	PPM or mg/L	< 200
Iron	0.0109 Good	0.0027 Good	mg/L	< 0.3
Lead	0.0003 Good	0.0002 Good	mg/L	< 0.01
Magnesium	36.4 Measured	12.8 Measured	mg/L	No limit
Manganese	0.0001 Good	0.001 Good	mg/L	< 0.1
Nitrate	5.23 Good	0.014 Good	mg/L	< 50
Sodium	163 Near limit	76.5 Good	mg/L	< 180
Sulfate	99.3 Good	44 Good	mg/L	< 500
Total Chlorine	1.1 Good	1.2 Good	mg/L	< 5
Total Dissolved Solids	827 Exceeds	298 Good	mg/L	< 600
Turbidity	0.1 Good	0.1 Good	NTU	< 5

Explore further

Blinman

Flinders Ranges

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.