Bray vs Coles

Name: Water Quality Comparison: Bray vs Coles
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Coles, SA

9.1

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Bray scores 9.2/10 and Coles scores 9.1/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Coles's tap water is 'very hard' at 319 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Bray, SA

Coles, SA

Key metrics comparison

Hardness (mg/L)

Bray

125 Lower

Coles

319 Higher

pH Level

Bray

—

Coles

—

Fluoride (mg/L)

Bray

0.3 Same

Coles

0.3 Same

Chlorine (mg/L)

Bray

0.9 Higher

Coles

0.8 Lower

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Bray	Coles	Unit	ADWG Guideline
Alkalinity	321 Measured	318 Measured	mg/L	No limit
Aluminium	0.001 Good	0.001 Good	mg/L	< 0.2
Calcium	22.9 Measured	77 Measured	mg/L	No limit
Chloride	226 Near limit	276 Exceeds	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0279 Good	0.0216 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.3 Good	0.3 Good	mg/L	< 1.5
Free Chlorine	0.9 Good	0.8 Good	mg/L	< 5
Hardness	125 Good	319 Exceeds	PPM or mg/L	< 200
Iron	0.0072 Good	0.0074 Good	mg/L	< 0.3
Lead	0.0005 Good	0.0008 Good	mg/L	< 0.01
Magnesium	16.5 Measured	30.7 Measured	mg/L	No limit
Manganese	0.0001 Good	0.0001 Good	mg/L	< 0.1
Nitrate	0.09 Good	0.04 Good	mg/L	< 50
Sodium	246 Exceeds	167 Near limit	mg/L	< 180
Sulfate	22.8 Good	9.5 Good	mg/L	< 500
Total Dissolved Solids	773 Exceeds	819 Exceeds	mg/L	< 600
Turbidity	0.1 Good	0.1 Good	NTU	< 5

Explore further

Bray

Coles

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.