Brunchilly vs Tennant Creek

Name: Water Quality Comparison: Brunchilly vs Tennant Creek
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Brunchilly, NT

8.7

Quality Score

Supplied by Power and Water Corporation

Tennant Creek, NT

9.2

Quality Score

Supplied by Power and Water Corporation

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

Tennant Creek has better water quality with a score of 9.2/10 compared to Brunchilly's 8.7/10. Tennant Creek has softer water (232 vs 453 mg/L).

Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Brunchilly's tap water is 'very hard' at 453 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Brunchilly, NT

Tennant Creek, NT

Key metrics comparison

Hardness (mg/L)

Brunchilly

453 Higher

Tennant Creek

232 Lower

pH Level

Brunchilly

7.8 Normal

Tennant Creek

7.8 Normal

Fluoride (mg/L)

Brunchilly

0.78 Lower

Tennant Creek

1.5 Higher

Chlorine (mg/L)

Brunchilly

1 Same

Tennant Creek

1 Same

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Brunchilly	Tennant Creek	Unit	ADWG Guideline
Alkalinity	450 Measured	160 Measured	mg/L CaCO3	No limit
Aluminium	0.02 Good	0.04 Good	mg/L	< 0.2
Calcium	0.00025 Measured	0.00025 Measured	mg/L	No limit
Chloride	162 Good	144 Good	mg/L	< 250
Colour	2 Good	2 Good	HU	< 15
Conductivity	7.7 Measured	7.9 Measured	µS/cm	No limit
Copper	0.02 Good	0.02 Good	mg/L	< 2
Fluoride	0.78 Good	1.5 Near limit	mg/L	< 1.5
Free Chlorine	1 Good	0.8 Good	mg/L	< 5
Hardness	453 Exceeds	232 Exceeds	mg/L CaCO3	< 200
Iron	0.01 Good	0.07 Good	mg/L	< 0.3
Magnesium	51 Measured	84 Measured	mg/L	No limit
Manganese	0.005 Good	0.005 Good	mg/L	< 0.1
pH	7.8 Normal	7.8 Normal	pH units	6.5 – 8.5
Sulfate	0.003 Good	0.007 Good	mg/L	< 500
Total Chlorine	1 Good	1 Good	mg/L	< 5
Total Dissolved Solids	142 Good	90.1 Good	mg/L	< 600
Turbidity	1.2 Good	1.1 Good	NTU	< 5
Zinc	0.29 Measured	0.011 Measured	mg/L	No limit

Explore further

Brunchilly

Tennant Creek

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Power and Water Corporation. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.