Copley vs Mount Serle

Name: Water Quality Comparison: Copley vs Mount Serle
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Mount Serle, SA

9.7

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

Mount Serle has better water quality with a score of 9.7/10 compared to Copley's 9.2/10. Mount Serle has softer water (6 vs 6 mg/L).

Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Chlorine in Copley is 1.1 mg/L — that's high. It's why your tap water smells like a pool.

Chlorine is added on purpose (kills bugs in the pipes), but by the time it reaches your tap it ruins everything you taste. Tea takes on a medicinal edge. Kids turn down water and drink juice or soft drink instead. The usual family fix is bottled water, but a simple carbon filter is the cleaner daily habit. Worse, many filter pitchers go in the fridge and get ignored because they're slow.

BRITAOur pick

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

A BRITA Marella is the opposite: fast (2.4L, fills in under a minute), kid-friendly handle, fridge-door fit, replacement cartridges available everywhere in AU. Chlorine gone, taste clean, no plumber, no faff — this is the default answer for chlorine taste in Australia.

Kill the taste →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Copley, SA

Mount Serle, SA

Key metrics comparison

Hardness (mg/L)

Copley

6 Same

Mount Serle

6 Same

pH Level

Copley

8.6 Outside range

Mount Serle

—

Fluoride (mg/L)

Copley

0.1 Same

Mount Serle

0.1 Same

Chlorine (mg/L)

Copley

1.1 Same

Mount Serle

1.1 Same

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Copley	Mount Serle	Unit	ADWG Guideline
Alkalinity	66 Measured	66 Measured	mg/L	No limit
Aluminium	0.022 Good	0.022 Good	mg/L	< 0.2
Calcium	2.73 Measured	2.73 Measured	mg/L	No limit
Chloride	36 Good	36 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.005 Good	0.005 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.1 Good	0.1 Good	mg/L	< 1.5
Free Chlorine	1.1 Good	1.1 Good	mg/L	< 5
Hardness	6 Good	6 Good	PPM or mg/L	< 200
Iron	0.0031 Good	0.0031 Good	mg/L	< 0.3
Lead	0.0001 Good	0.0001 Good	mg/L	< 0.01
Magnesium	0.25 Measured	0.25 Measured	mg/L	No limit
Manganese	0.001 Good	0.001 Good	mg/L	< 0.1
Nitrate	0.61 Good	0.61 Good	mg/L	< 50
pH	8.6 Outside range	—	pH units	6.5 – 8.5
Sodium	50 Good	50 Good	mg/L	< 180
Sulfate	13.7 Good	13.7 Good	mg/L	< 500
Total Chlorine	1.1 Good	1.1 Good	mg/L	< 5
Total Dissolved Solids	134 Good	134 Good	mg/L	< 600
Turbidity	0.1 Good	0.1 Good	NTU	< 5

Explore further

Copley

Mount Serle

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.