Daly Waters vs Larrimah

Name: Water Quality Comparison: Daly Waters vs Larrimah
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Daly Waters, NT

8.6

Quality Score

Supplied by Power and Water Corporation

Larrimah, NT

8.7

Quality Score

Supplied by Power and Water Corporation

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Daly Waters scores 8.6/10 and Larrimah scores 8.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Daly Waters's tap water is 'very hard' at 549 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Daly Waters, NT

Larrimah, NT

Key metrics comparison

Hardness (mg/L)

Daly Waters

549 Higher

Larrimah

523 Lower

pH Level

Daly Waters

7.2 Normal

Larrimah

7.6 Normal

Fluoride (mg/L)

Daly Waters

0.42 Higher

Larrimah

0.22 Lower

Chlorine (mg/L)

Daly Waters

1 Lower

Larrimah

2 Higher

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Daly Waters	Larrimah	Unit	ADWG Guideline
Alkalinity	570 Measured	530 Measured	mg/L CaCO3	No limit
Aluminium	0.03 Good	0.02 Good	mg/L	< 0.2
Calcium	0.00056 Measured	0.0016 Measured	mg/L	No limit
Chloride	277 Exceeds	201 Near limit	mg/L	< 250
Colour	2 Good	2 Good	HU	< 15
Conductivity	7.3 Measured	7.8 Measured	µS/cm	No limit
Copper	0.2 Good	0.1 Good	mg/L	< 2
Fluoride	0.42 Good	0.22 Good	mg/L	< 1.5
Free Chlorine	0.9 Good	1 Good	mg/L	< 5
Hardness	549 Exceeds	523 Exceeds	mg/L CaCO3	< 200
Iron	0.36 Exceeds	0.04 Good	mg/L	< 0.3
Magnesium	33 Measured	39 Measured	mg/L	No limit
Manganese	0.018 Good	0.005 Good	mg/L	< 0.1
pH	7.2 Normal	7.6 Normal	pH units	6.5 – 8.5
Sulfate	0.003 Good	0.003 Good	mg/L	< 500
Total Chlorine	1 Good	2 Good	mg/L	< 5
Total Dissolved Solids	293 Good	180 Good	mg/L	< 600
Turbidity	1.2 Good	1.3 Good	NTU	< 5
Zinc	0.036 Measured	0.015 Measured	mg/L	No limit

Explore further

Daly Waters

Larrimah

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Power and Water Corporation. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.