Gerard vs Lyrup

Name: Water Quality Comparison: Gerard vs Lyrup
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Lyrup, SA

9.0

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Gerard scores 8.9/10 and Lyrup scores 9.0/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Chlorine in Lyrup is 1.1 mg/L — that's high. It's why your tap water smells like a pool.

Chlorine is added on purpose (kills bugs in the pipes), but by the time it reaches your tap it ruins everything you taste. Tea takes on a medicinal edge. Kids turn down water and drink juice or soft drink instead. The usual family fix is bottled water, but a simple carbon filter is the cleaner daily habit. Worse, many filter pitchers go in the fridge and get ignored because they're slow.

BRITAOur pick

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

A BRITA Marella is the opposite: fast (2.4L, fills in under a minute), kid-friendly handle, fridge-door fit, replacement cartridges available everywhere in AU. Chlorine gone, taste clean, no plumber, no faff — this is the default answer for chlorine taste in Australia.

Kill the taste →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Gerard, SA

Lyrup, SA

Key metrics comparison

Hardness (mg/L)

Gerard

64 Lower

Lyrup

68 Higher

pH Level

Gerard

0.05 Outside range

Lyrup

0.05 Outside range

Fluoride (mg/L)

Gerard

0.7 Same

Lyrup

0.7 Same

Chlorine (mg/L)

Gerard

1 Lower

Lyrup

1.1 Higher

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Gerard	Lyrup	Unit	ADWG Guideline
Alkalinity	50 Measured	53 Measured	mg/L	No limit
Aluminium	0.026 Good	0.016 Good	mg/L	< 0.2
Calcium	11.59 Measured	12.7 Measured	mg/L	No limit
Chloride	58 Good	57 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0201 Good	0.0055 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.7 Good	0.7 Good	mg/L	< 1.5
Free Chlorine	1 Good	1.1 Good	mg/L	< 5
Hardness	64 Good	68 Good	PPM or mg/L	< 200
Iron	0.1899 Good	0.0077 Good	mg/L	< 0.3
Lead	0.0002 Good	0.0002 Good	mg/L	< 0.01
Magnesium	8.58 Measured	8.82 Measured	mg/L	No limit
Manganese	0.0113 Good	0.0019 Good	mg/L	< 0.1
Nitrate	0.31 Good	0.54 Good	mg/L	< 50
pH	0.05 Outside range	0.05 Outside range	µg/L	6.5 – 8.5
Sodium	45.7 Good	41.7 Good	mg/L	< 180
Sulfate	35.7 Good	39.5 Good	mg/L	< 500
Total Chlorine	1 Good	1.3 Good	mg/L	< 5
Total Dissolved Solids	215 Good	219 Good	mg/L	< 600
Turbidity	0.85 Good	0.1 Good	NTU	< 5

Explore further

Gerard

Lyrup

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.