Kalka vs Kanpi

Name: Water Quality Comparison: Kalka vs Kanpi
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Kanpi, SA

9.5

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

Kanpi has better water quality with a score of 9.5/10 compared to Kalka's 9.0/10. Kanpi has softer water (90 vs 366 mg/L).

Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Kalka's tap water is 'very hard' at 366 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Kalka, SA

Kanpi, SA

Key metrics comparison

Hardness (mg/L)

Kalka

366 Higher

Kanpi

90 Lower

pH Level

Kalka

7.7 Normal

Kanpi

7.8 Normal

Fluoride (mg/L)

Kalka

1 Higher

Kanpi

0.6 Lower

Chlorine (mg/L)

Kalka

—

Kanpi

—

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Kalka	Kanpi	Unit	ADWG Guideline
Alkalinity	318 Measured	101 Measured	mg/L	No limit
Aluminium	0.002 Good	0.006 Good	mg/L	< 0.2
Calcium	46.7 Measured	14.5 Measured	mg/L	No limit
Chloride	121 Good	71 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0148 Good	0.022 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	MPN/100mL	< 0
Fluoride	1 Good	0.6 Good	mg/L	< 1.5
Hardness	366 Exceeds	90 Good	PPM or mg/L	< 200
Iron	0.003 Good	0.0036 Good	mg/L	< 0.3
Lead	0.0005 Good	0.0008 Good	mg/L	< 0.01
Magnesium	60.5 Measured	13 Measured	mg/L	No limit
Manganese	0.0001 Good	0.0001 Good	mg/L	< 0.1
Nitrate	23.03 Good	6.22 Good	mg/L	< 50
pH	7.7 Normal	7.8 Normal	pH units	6.5 – 8.5
Sodium	89 Good	58.9 Good	mg/L	< 180
Sulfate	54.9 Good	16.8 Good	mg/L	< 500
Total Dissolved Solids	618 Exceeds	292 Good	mg/L	< 600
Turbidity	0.1 Good	0.1 Good	NTU	< 5

Explore further

Kalka

Kanpi

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.