Kootaberra vs Mount Arden

Name: Water Quality Comparison: Kootaberra vs Mount Arden
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Mount Arden, SA

9.0

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

Mount Arden has better water quality with a score of 9.0/10 compared to Kootaberra's 8.1/10. Mount Arden has softer water (77 vs 460 mg/L).

Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Kootaberra's tap water is 'very hard' at 460 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Kootaberra, SA

Mount Arden, SA

Key metrics comparison

Hardness (mg/L)

Kootaberra

460 Higher

Mount Arden

77 Lower

pH Level

Kootaberra

0.05 Outside range

Mount Arden

8.7 Outside range

Fluoride (mg/L)

Kootaberra

0.6 Higher

Mount Arden

0.52 Lower

Chlorine (mg/L)

Kootaberra

1.1 Higher

Mount Arden

0.1 Lower

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Kootaberra	Mount Arden	Unit	ADWG Guideline
Alkalinity	416 Measured	64 Measured	mg/L	No limit
Aluminium	0.001 Good	0.019 Good	mg/L	< 0.2
Calcium	72.9 Measured	15.3 Measured	mg/L	No limit
Chloride	387 Exceeds	75 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0136 Good	0.0067 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.6 Good	0.52 Good	mg/L	< 1.5
Free Chlorine	1.1 Good	0.1 Good	mg/L	< 5
Hardness	460 Exceeds	77 Good	PPM or mg/L	< 200
Iron	0.0007 Good	0.0098 Good	mg/L	< 0.3
Lead	0.0005 Good	0.0002 Good	mg/L	< 0.01
Magnesium	67.6 Measured	9.49 Measured	mg/L	No limit
Manganese	0.0001 Good	0.0061 Good	mg/L	< 0.1
Nitrate	0.5 Good	1.089 Good	mg/L	< 50
pH	0.05 Outside range	8.7 Outside range	µg/L	6.5 – 8.5
Sodium	232 Exceeds	60.4 Good	mg/L	< 180
Sulfate	79.3 Good	47.8 Good	mg/L	< 500
Total Chlorine	1.2 Good	2.8 Good	mg/L	< 5
Total Dissolved Solids	—	275 Good	mg/L	< 600
Turbidity	0.12 Good	0.1 Good	NTU	< 5

Explore further

Kootaberra

Mount Arden

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.