Melrose vs Wepowie

Name: Water Quality Comparison: Melrose vs Wepowie
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Wepowie, SA

9.0

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

Wepowie has better water quality with a score of 9.0/10 compared to Melrose's 7.4/10. Wepowie has softer water (77 vs 366 mg/L).

Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Melrose's tap water is 'very hard' at 366 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Melrose, SA

Wepowie, SA

Key metrics comparison

Hardness (mg/L)

Melrose

366 Higher

Wepowie

77 Lower

pH Level

Melrose

0.05 Outside range

Wepowie

8.7 Outside range

Fluoride (mg/L)

Melrose

1.1 Higher

Wepowie

0.52 Lower

Chlorine (mg/L)

Melrose

1 Higher

Wepowie

0.1 Lower

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Melrose	Wepowie	Unit	ADWG Guideline
Alkalinity	299 Measured	64 Measured	mg/L	No limit
Aluminium	0.004 Good	0.019 Good	mg/L	< 0.2
Calcium	63.5 Measured	15.3 Measured	mg/L	No limit
Chloride	575 Exceeds	75 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0151 Good	0.0067 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	1.1 Good	0.52 Good	mg/L	< 1.5
Free Chlorine	1 Good	0.1 Good	mg/L	< 5
Hardness	366 Exceeds	77 Good	PPM or mg/L	< 200
Iron	0.0063 Good	0.0098 Good	mg/L	< 0.3
Lead	0.0003 Good	0.0002 Good	mg/L	< 0.01
Magnesium	50.3 Measured	9.49 Measured	mg/L	No limit
Manganese	0.0001 Good	0.0061 Good	mg/L	< 0.1
Nitrate	1.87 Good	1.089 Good	mg/L	< 50
pH	0.05 Outside range	8.7 Outside range	µg/L	6.5 – 8.5
Sodium	415 Exceeds	60.4 Good	mg/L	< 180
Sulfate	174 Good	47.8 Good	mg/L	< 500
Total Chlorine	1 Good	2.8 Good	mg/L	< 5
Total Dissolved Solids	—	275 Good	mg/L	< 600
Turbidity	0.1 Good	0.1 Good	NTU	< 5

Explore further

Melrose

Wepowie

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.