Melrose vs Yunyarinyi

Name: Water Quality Comparison: Melrose vs Yunyarinyi
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Yunyarinyi, SA

9.8

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

Yunyarinyi has better water quality with a score of 9.8/10 compared to Melrose's 8.0/10. Yunyarinyi has softer water (21 vs 366 mg/L).

Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Melrose's tap water is 'very hard' at 366 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Melrose, SA

Yunyarinyi, SA

Key metrics comparison

Hardness (mg/L)

Melrose

366 Higher

Yunyarinyi

21 Lower

pH Level

Melrose

7.4 Normal

Yunyarinyi

8.2 Normal

Fluoride (mg/L)

Melrose

1.1 Higher

Yunyarinyi

0.1 Lower

Chlorine (mg/L)

Melrose

Yunyarinyi

—

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Melrose	Yunyarinyi	Unit	ADWG Guideline
Alkalinity	299 Measured	27 Measured	mg/L	No limit
Aluminium	0.004 Good	0.008 Good	mg/L	< 0.2
Calcium	63.5 Measured	7.36 Measured	mg/L	No limit
Chloride	575 Exceeds	4 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0151 Good	0.0071 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	1.1 Good	0.1 Good	mg/L	< 1.5
Free Chlorine	1 Good	—	mg/L	< 5
Hardness	366 Exceeds	21 Good	PPM or mg/L	< 200
Iron	0.0063 Good	0.0038 Good	mg/L	< 0.3
Lead	0.0003 Good	0.0002 Good	mg/L	< 0.01
Magnesium	50.3 Measured	0.67 Measured	mg/L	No limit
Manganese	0.0001 Good	0.0002 Good	mg/L	< 0.1
Nitrate	1.87 Good	1.63 Good	mg/L	< 50
pH	7.4 Normal	8.2 Normal	pH units	6.5 – 8.5
Sodium	415 Exceeds	3.2 Good	mg/L	< 180
Sulfate	174 Good	0.6 Good	mg/L	< 500
Total Chlorine	1 Good	—	mg/L	< 5
Total Dissolved Solids	—	33 Good	mg/L	< 600
Turbidity	0.1 Good	0.12 Good	NTU	< 5

Explore further

Melrose

Yunyarinyi

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.