Miniyerri vs Newcastle Waters

Name: Water Quality Comparison: Miniyerri vs Newcastle Waters
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Miniyerri, NT

9.4

Quality Score

Supplied by Power and Water Corporation

Newcastle Waters, NT

8.7

Quality Score

Supplied by Power and Water Corporation

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

Miniyerri has better water quality with a score of 9.4/10 compared to Newcastle Waters's 8.7/10. Miniyerri has softer water (110 vs 453 mg/L).

Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Chlorine in Miniyerri is 2 mg/L — that's high. It's why your tap water smells like a pool.

Chlorine is added on purpose (kills bugs in the pipes), but by the time it reaches your tap it ruins everything you taste. Tea takes on a medicinal edge. Kids turn down water and drink juice or soft drink instead. The usual family fix is bottled water, but a simple carbon filter is the cleaner daily habit. Worse, many filter pitchers go in the fridge and get ignored because they're slow.

BRITAOur pick

Marella 2.4L Fridge Water Filter Jug (Maxtra Pro)

4.8 · 125 ratings on Amazon

A BRITA Marella is the opposite: fast (2.4L, fills in under a minute), kid-friendly handle, fridge-door fit, replacement cartridges available everywhere in AU. Chlorine gone, taste clean, no plumber, no faff — this is the default answer for chlorine taste in Australia.

Kill the taste →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Miniyerri, NT

Newcastle Waters, NT

Key metrics comparison

Hardness (mg/L)

Miniyerri

110 Lower

Newcastle Waters

453 Higher

pH Level

Miniyerri

7.7 Normal

Newcastle Waters

7.8 Normal

Fluoride (mg/L)

Miniyerri

0.67 Lower

Newcastle Waters

0.78 Higher

Chlorine (mg/L)

Miniyerri

2 Higher

Newcastle Waters

1 Lower

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Miniyerri	Newcastle Waters	Unit	ADWG Guideline
Alkalinity	70 Measured	450 Measured	mg/L CaCO3	No limit
Aluminium	0.02 Good	0.02 Good	mg/L	< 0.2
Calcium	0.003 Measured	0.00025 Measured	mg/L	No limit
Chloride	7 Good	162 Good	mg/L	< 250
Colour	2 Good	2 Good	HU	< 15
Conductivity	7.4 Measured	7.7 Measured	µS/cm	No limit
Copper	0.1 Good	0.02 Good	mg/L	< 2
Fluoride	0.67 Good	0.78 Good	mg/L	< 1.5
Free Chlorine	1.9 Good	1 Good	mg/L	< 5
Hardness	110 Good	453 Exceeds	mg/L CaCO3	< 200
Iron	0.01 Good	0.01 Good	mg/L	< 0.3
Magnesium	15 Measured	51 Measured	mg/L	No limit
Manganese	0.005 Good	0.005 Good	mg/L	< 0.1
pH	7.7 Normal	7.8 Normal	pH units	6.5 – 8.5
Sulfate	0.039 Good	0.003 Good	mg/L	< 500
Total Chlorine	2 Good	1 Good	mg/L	< 5
Total Dissolved Solids	5 Good	142 Good	mg/L	< 600
Turbidity	1.4 Good	1.2 Good	NTU	< 5
Zinc	0.025 Measured	0.29 Measured	mg/L	No limit

Explore further

Miniyerri

Newcastle Waters

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Power and Water Corporation. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.