Mount Barry vs Nilpinna Station

Name: Water Quality Comparison: Mount Barry vs Nilpinna Station
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Nilpinna Station, SA

9.1

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Mount Barry scores 9.0/10 and Nilpinna Station scores 9.1/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Chlorine in Nilpinna Station is 1.2 mg/L — that's high. It's why your tap water smells like a pool.

Chlorine is added on purpose (kills bugs in the pipes), but by the time it reaches your tap it ruins everything you taste. Tea takes on a medicinal edge. Kids turn down water and drink juice or soft drink instead. The usual family fix is bottled water, but a simple carbon filter is the cleaner daily habit. Worse, many filter pitchers go in the fridge and get ignored because they're slow.

BRITAOur pick

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

A BRITA Marella is the opposite: fast (2.4L, fills in under a minute), kid-friendly handle, fridge-door fit, replacement cartridges available everywhere in AU. Chlorine gone, taste clean, no plumber, no faff — this is the default answer for chlorine taste in Australia.

Kill the taste →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Mount Barry, SA

Nilpinna Station, SA

Key metrics comparison

Hardness (mg/L)

Mount Barry

77 Higher

Nilpinna Station

56 Lower

pH Level

Mount Barry

8.7 Outside range

Nilpinna Station

0.05 Outside range

Fluoride (mg/L)

Mount Barry

0.52 Higher

Nilpinna Station

0.1 Lower

Chlorine (mg/L)

Mount Barry

0.1 Lower

Nilpinna Station

1.2 Higher

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Mount Barry	Nilpinna Station	Unit	ADWG Guideline
Alkalinity	64 Measured	56 Measured	mg/L	No limit
Aluminium	0.019 Good	0.001 Good	mg/L	< 0.2
Calcium	15.3 Measured	17.8 Measured	mg/L	No limit
Chloride	75 Good	73 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0067 Good	0.0024 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.52 Good	0.1 Good	mg/L	< 1.5
Free Chlorine	0.1 Good	1.2 Good	mg/L	< 5
Hardness	77 Good	56 Good	PPM or mg/L	< 200
Iron	0.0098 Good	0.0316 Good	mg/L	< 0.3
Lead	0.0002 Good	0.0001 Good	mg/L	< 0.01
Magnesium	9.49 Measured	2.73 Measured	mg/L	No limit
Manganese	0.0061 Good	0.0017 Good	mg/L	< 0.1
Nitrate	1.089 Good	0.22 Good	mg/L	< 50
pH	8.7 Outside range	0.05 Outside range	pH units	6.5 – 8.5
Sodium	60.4 Good	57.7 Good	mg/L	< 180
Sulfate	47.8 Good	27.7 Good	mg/L	< 500
Total Chlorine	2.8 Good	1.2 Good	mg/L	< 5
Total Dissolved Solids	275 Good	246 Good	mg/L	< 600
Turbidity	0.1 Good	0.1 Good	NTU	< 5

Explore further

Mount Barry

Nilpinna Station

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.