Mount Burr vs Wattle Range

Name: Water Quality Comparison: Mount Burr vs Wattle Range
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Wattle Range, SA

8.6

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Mount Burr scores 8.9/10 and Wattle Range scores 8.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Wattle Range's tap water is 'very hard' at 340 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Mount Burr, SA

Wattle Range, SA

Key metrics comparison

Hardness (mg/L)

Mount Burr

285 Lower

Wattle Range

340 Higher

pH Level

Mount Burr

0.05 Outside range

Wattle Range

0.05 Outside range

Fluoride (mg/L)

Mount Burr

0.3 Higher

Wattle Range

0.1 Lower

Chlorine (mg/L)

Mount Burr

0.9 Lower

Wattle Range

1.2 Higher

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Mount Burr	Wattle Range	Unit	ADWG Guideline
Alkalinity	280 Measured	344 Measured	mg/L	No limit
Aluminium	0.003 Good	0.004 Good	mg/L	< 0.2
Calcium	83.9 Measured	119 Measured	mg/L	No limit
Chloride	81 Good	107 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0155 Good	0.0116 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.3 Good	0.1 Good	mg/L	< 1.5
Free Chlorine	0.9 Good	1.2 Good	mg/L	< 5
Hardness	285 Exceeds	340 Exceeds	PPM or mg/L	< 200
Iron	0.0016 Good	0.021 Good	mg/L	< 0.3
Lead	0.0008 Good	0.0008 Good	mg/L	< 0.01
Magnesium	18.4 Measured	10.5 Measured	mg/L	No limit
Manganese	0.0001 Good	0.0002 Good	mg/L	< 0.1
Nitrate	3.99 Good	0.03 Good	mg/L	< 50
pH	0.05 Outside range	0.05 Outside range	µg/L	6.5 – 8.5
Sodium	46.7 Good	64.3 Good	mg/L	< 180
Sulfate	8.3 Good	6.6 Good	mg/L	< 500
Total Chlorine	0.8 Good	0.9 Good	mg/L	< 5
Total Dissolved Solids	438 Good	548 Near limit	mg/L	< 600
Turbidity	0.1 Good	0.52 Good	NTU	< 5

Explore further

Mount Burr

Wattle Range

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.