Oak Valley vs Southport
Side-by-side tap water quality comparison
Which suburb has better water?
Oak Valley has better water quality with a score of 9.8/10 compared to Southport's 9.0/10. Oak Valley has softer water (7 vs 33.9 mg/L).
Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.
Visual comparison
Key metrics comparison
Full water quality comparison
All parameters compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Oak Valley | Southport | Unit | ADWG Guideline |
|---|---|---|---|---|
| Alkalinity | 12 Measured | 29.5 Measured | mg/L | No limit |
| Aluminium | 0.002 Good | 0.013 Good | mg/L | < 0.2 |
| Arsenic | — | 0.0005 Measured | mg/L | No limit |
| Bromate | — | 0.005 Measured | mg/L | No limit |
| Cadmium | — | 0.0001 Measured | mg/L | No limit |
| Calcium | 2.43 Measured | 12.5 Measured | mg/L | No limit |
| Chlorate | — | 0.066 Measured | mg/L | No limit |
| Chloride | 5 Good | 25.7 Good | mg/L | < 250 |
| Chromium | — | 0.001 Measured | mg/L | No limit |
| Colour | 1 Good | 1.3 Good | HU | < 15 |
| Conductivity | — | 197.5 Measured | µS/cm | No limit |
| Copper | 0.4811 Good | 0.001 Good | mg/L | < 2 |
| E. coli | 0 Compliant | 0 Compliant | MPN/100mL | < 0 |
| Fluoride | 0.1 Good | 0.81 Good | mg/L | < 1.5 |
| Free Chlorine | — | 1.7 Good | mg/L | < 5 |
| Hardness | 7 Good | 33.9 Good | PPM or mg/L | < 200 |
| Iron | 0.0043 Good | 0.01 Good | mg/L | < 0.3 |
| Lead | 0.0025 Good | 0.001 Good | mg/L | < 0.01 |
| Magnesium | 0.29 Measured | 0.7 Measured | mg/L | No limit |
| Manganese | 0.0027 Good | 0.001 Good | mg/L | < 0.1 |
| Mercury | — | 0.0001 Measured | mg/L | No limit |
| Ndma | — | 0.003 Measured | µg/L | No limit |
| Nickel | — | 0.001 Measured | mg/L | No limit |
| Nitrate | 3.57 Good | — | mg/L | < 50 |
| pH | 7.3 Normal | 6.2 Outside range | pH units | 6.5 – 8.5 |
| Sodium | 3.3 Good | 18.3 Good | mg/L | < 180 |
| Sulfate | 1 Good | — | mg/L | < 500 |
| Temperature | — | 25 Measured | °C | No limit |
| Total Chlorine | — | 1.6 Good | mg/L | < 5 |
| Total Dissolved Solids | 25 Good | — | mg/L | < 600 |
| Trihalomethanes | — | 0.0396 Good | mg/L | < 0.25 |
| Turbidity | 0.13 Good | 0.3 Good | NTU | < 5 |
| Zinc | — | 0.005 Measured | mg/L | No limit |
Explore further
Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water and Seqwater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.