Owen vs Pinery

Name: Water Quality Comparison: Owen vs Pinery
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Pinery, SA

8.8

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Owen scores 8.9/10 and Pinery scores 8.8/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Pinery's water is hard at 138 mg/L — you're cleaning scale off things that shouldn't need cleaning.

At this level, you'll see white rings inside the kettle, cloudy spots on glassware, and shampoo that never lathers properly. Over 5–10 years, scale slowly kills heating elements in your hot water system and dishwasher — the damage is invisible until they fail 2–3 years early. Boiling doesn't help; it concentrates the minerals.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

An under-sink reverse-osmosis tap gives you clean, soft drinking water without re-plumbing the whole house. The kettle stops scaling. Tea tastes like tea. No more bottled water runs. Fits on standard 15mm pipework, installs in a Saturday.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Owen, SA

Pinery, SA

Key metrics comparison

Hardness (mg/L)

Owen

82 Lower

Pinery

138 Higher

pH Level

Owen

8.8 Outside range

Pinery

0.05 Outside range

Fluoride (mg/L)

Owen

0.7 Higher

Pinery

0.6 Lower

Chlorine (mg/L)

Owen

0.1 Lower

Pinery

0.6 Higher

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Owen	Pinery	Unit	ADWG Guideline
Alkalinity	67 Measured	65 Measured	mg/L	No limit
Aluminium	0.029 Good	0.019 Good	mg/L	< 0.2
Calcium	16 Measured	27.9 Measured	mg/L	No limit
Chloride	70 Good	127 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0048 Good	0.0157 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.7 Good	0.6 Good	mg/L	< 1.5
Free Chlorine	0.1 Good	0.6 Good	mg/L	< 5
Hardness	82 Good	138 Good	PPM or mg/L	< 200
Iron	0.0014 Good	0.0828 Good	mg/L	< 0.3
Lead	0.0002 Good	0.0005 Good	mg/L	< 0.01
Magnesium	10.21 Measured	16.7 Measured	mg/L	No limit
Manganese	0.0032 Good	0.0041 Good	mg/L	< 0.1
Nitrate	0.7 Good	0.18 Good	mg/L	< 50
pH	8.8 Outside range	0.05 Outside range	pH units	6.5 – 8.5
Sodium	59.5 Good	73.7 Good	mg/L	< 180
Sulfate	49.5 Good	59.2 Good	mg/L	< 500
Total Chlorine	3.7 Good	0.7 Good	mg/L	< 5
Total Dissolved Solids	275 Good	391 Good	mg/L	< 600
Turbidity	0.1 Good	0.25 Good	NTU	< 5

Explore further

Owen

Pinery

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.