Pinda Springs vs Warraweena

Name: Water Quality Comparison: Pinda Springs vs Warraweena
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Warraweena, SA

8.6

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

Pinda Springs has better water quality with a score of 9.2/10 compared to Warraweena's 8.6/10. Pinda Springs has softer water (6 vs 288 mg/L).

Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Warraweena's tap water is 'very hard' at 288 mg/L — and scale is building up in your home right now.

Every time you boil a kettle or run the hot tap, calcium is baking onto heating elements. Hot water systems, dishwashers, coffee machines, shower screens and glassware all take the same damage. "Descaler tablets" treat the symptom; they don't stop the mineral from entering your home in the first place.

iSpringOur pick

RCC7AK 6-Stage Under-Sink RO (with Alkaline Re-min)

4.6 · 13,756 ratings on Amazon

A reverse-osmosis system blocks 95%+ of dissolved minerals before the water reaches your tap. No plumber needed — it fits under the kitchen sink in a Saturday. The drinking water, ice, tea and coffee all taste clean for the first time. Reducing scale at the tap helps protect the appliances you use every day.

Stop the scale →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Pinda Springs, SA

Warraweena, SA

Key metrics comparison

Hardness (mg/L)

Pinda Springs

6 Lower

Warraweena

288 Higher

pH Level

Pinda Springs

0.05 Outside range

Warraweena

0.05 Outside range

Fluoride (mg/L)

Pinda Springs

0.1 Lower

Warraweena

0.6 Higher

Chlorine (mg/L)

Pinda Springs

1.1 Higher

Warraweena

1 Lower

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Pinda Springs	Warraweena	Unit	ADWG Guideline
Alkalinity	66 Measured	204 Measured	mg/L	No limit
Aluminium	0.022 Good	0.002 Good	mg/L	< 0.2
Calcium	2.73 Measured	55.2 Measured	mg/L	No limit
Chloride	36 Good	276 Exceeds	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.005 Good	0.021 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.1 Good	0.6 Good	mg/L	< 1.5
Free Chlorine	1.1 Good	1 Good	mg/L	< 5
Hardness	6 Good	288 Exceeds	PPM or mg/L	< 200
Iron	0.0031 Good	0.0109 Good	mg/L	< 0.3
Lead	0.0001 Good	0.0003 Good	mg/L	< 0.01
Magnesium	0.25 Measured	36.4 Measured	mg/L	No limit
Manganese	0.001 Good	0.0001 Good	mg/L	< 0.1
Nitrate	0.61 Good	5.23 Good	mg/L	< 50
pH	0.05 Outside range	0.05 Outside range	µg/L	6.5 – 8.5
Sodium	50 Good	163 Near limit	mg/L	< 180
Sulfate	13.7 Good	99.3 Good	mg/L	< 500
Total Chlorine	1.1 Good	1.1 Good	mg/L	< 5
Total Dissolved Solids	134 Good	827 Exceeds	mg/L	< 600
Turbidity	0.1 Good	0.1 Good	NTU	< 5

Explore further

Pinda Springs

Warraweena

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.