Taylorville Station vs Woolpunda

Name: Water Quality Comparison: Taylorville Station vs Woolpunda
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Woolpunda, SA

9.1

Quality Score

Supplied by SA Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Taylorville Station scores 9.5/10 and Woolpunda scores 9.1/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Chlorine in Taylorville Station is 1 mg/L — above the taste threshold. That pool smell in every glass is real.

Chlorine is added on purpose (kills bugs in the pipes), but by the time it reaches your tap it ruins everything you taste. Tea takes on a medicinal edge. Kids turn down water and drink juice or soft drink instead. The usual family fix is bottled water, but a simple carbon filter is the cleaner daily habit. Worse, many filter pitchers go in the fridge and get ignored because they're slow.

BRITAOur pick

Marella 2.4L Fridge Water Filter Jug (Maxtra Pro)

4.8 · 125 ratings on Amazon

A BRITA Marella is the opposite: fast (2.4L, fills in under a minute), kid-friendly handle, fridge-door fit, replacement cartridges available everywhere in AU. Chlorine gone, taste clean, no plumber, no faff — this is the default answer for chlorine taste in Australia.

Kill the taste →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Taylorville Station, SA

Woolpunda, SA

Key metrics comparison

Hardness (mg/L)

Taylorville Station

71 Lower

Woolpunda

74 Higher

pH Level

Taylorville Station

—

Woolpunda

8.8 Outside range

Fluoride (mg/L)

Taylorville Station

0.7 Higher

Woolpunda

0.1 Lower

Chlorine (mg/L)

Taylorville Station

1 Higher

Woolpunda

0.1 Lower

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Taylorville Station	Woolpunda	Unit	ADWG Guideline
Alkalinity	47 Measured	77 Measured	mg/L	No limit
Aluminium	0.014 Good	0.02 Good	mg/L	< 0.2
Calcium	12.94 Measured	14.6 Measured	mg/L	No limit
Chloride	63 Good	72 Good	mg/L	< 250
Colour	1 Good	1 Good	HU	< 15
Copper	0.0244 Good	0.0012 Good	mg/L	< 2
E. coli	0 Compliant	0 Compliant	cfu/100mL	< 0
Fluoride	0.7 Good	0.1 Good	mg/L	< 1.5
Free Chlorine	1 Good	0.1 Good	mg/L	< 5
Hardness	71 Good	74 Good	PPM or mg/L	< 200
Iron	0.0147 Good	0.002 Good	mg/L	< 0.3
Lead	0.0004 Good	0.0001 Good	mg/L	< 0.01
Magnesium	9.46 Measured	9.1 Measured	mg/L	No limit
Manganese	0.0042 Good	0.001 Good	mg/L	< 0.1
Nitrate	0.51 Good	2.01 Good	mg/L	< 50
pH	—	8.8 Outside range	pH units	6.5 – 8.5
Sodium	51.1 Good	50.9 Good	mg/L	< 180
Sulfate	42.1 Good	13.4 Good	mg/L	< 500
Total Chlorine	1.1 Good	2.4 Good	mg/L	< 5
Total Dissolved Solids	224 Good	240 Good	mg/L	< 600
Turbidity	0.17 Good	0.1 Good	NTU	< 5

Explore further

Taylorville Station

Woolpunda

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from SA Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.