Tap Water Quality in Boat Harbour, NSW
Postcode 2316 · Supplied by Hunter Water via Anna Bay/Nelson Bay
Quality Score
About Boat Harbour
Boat Harbour is a suburb of 993 residents in New South Wales (postcode 2316). The median age is 47. It falls within the Hunter Water area. Neighbouring suburbs include Anna Bay, Fishermans Bay, Taylors Beach, One Mile.
Most residents own outright (48%), while 32% own their home with a mortgage, while 19% rent. The median household income is $90,532 per year. The top countries of birth for residents are United Kingdom (38%), New Zealand (17%), and South Africa (8%).
Tap water in Boat Harbour is supplied by Hunter Water. The suburb receives water via the Anna Bay/Nelson Bay supply zone.
Water quality summary
Based on 2026 water quality reports, Boat Harbour achieves a WaterScore of 9.6 out of 10, rated excellent overall. The pH level is 7.51, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.95 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 1.29 mg/L — well within the ADWG guideline of 5 mg/L. Some residents may notice a slight taste, which can be reduced by refrigerating water or using a carbon filter. Turbidity is 0.2 NTU, indicating clear water, within the ADWG guideline of 5 NTU.
Compare with nearby suburbs: Anna Bay , Fishermans Bay , Taylors Beach
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Boat Harbour
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
Ideal for Boat Harbour — removes chlorine taste and odour.
Waterdrop
TSA Under-Sink Filter (Fluoride + PFAS)
4.4 · 2,237 ratings on Amazon
A reliable tsa under-sink filter (fluoride + pfas) suitable for Boat Harbour's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
Ideal for Boat Harbour — removes chlorine taste and odour.
Comparison
How Boat Harbour compares
Compared to New South Wales and national averages
| Metric | Boat Harbour | NSW Avg | National Avg |
|---|---|---|---|
| Hardness | — | 45.9 mg/L | 85.1 mg/L |
| pH | 7.51 | 7.7 | 8.4 |
| Fluoride | 0.95 mg/L | 1 mg/L | 0.7 mg/L |
| Chlorine | 1.29 mg/L | — | — |
| Turbidity | 0.2 NTU | 0.2 NTU | 0.4 NTU |
| TDS | — | 116.3 mg/L | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Fluoride | 0.95 | mg/L | < 1.5 | Good |
| Total Chlorine | 1.29 | mg/L | < 5 | Good |
| Copper | 0.006 | mg/L | < 2 | Good |
| Lead | 0 | mg/L | < 0.01 | Good |
| Manganese | 0.003 | mg/L | < 0.1 | Good |
| Trihalomethanes | 0.042 | mg/L | < 0.25 | Good |
| PFOS | 0.002 | µg/L | < 0.07 | Good |
| PFOA | 0.002 | µg/L | < 0.56 | Good |
| Pfhxs | 0.002 | µg/L | No limit | Measured |
| Pfbs | 0.002 | µg/L | No limit | Measured |
| Iron | 0.031 | mg/L | < 0.3 | Good |
| Aluminium | 0.045 | mg/L | < 0.2 | Good |
| Zinc | 0.002 | mg/L | No limit | Measured |
| Turbidity | 0.2 | NTU | < 5 | Good |
| Colour | 5 | HU | < 15 | Good |
| pH | 7.51 | pH units | 6.5 – 8.5 | Normal |
Safety
Safety assessment
Based on 16 parameters tested, all results fall within Australian Drinking Water Guidelines.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Data unavailable
Water Hardness
Hardness data is not currently available for this suburb.
Normal Range
pH Level
pH of 7.51 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Fluoridated
Fluoride
Fluoride at 0.95 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.
Chlorine
Disinfection
Chlorine measured at 1.29 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Reduce Chlorine Taste
Boat Harbour's chlorine level is 1.29 mg/L. An activated carbon jug filter or benchtop unit can noticeably reduce chlorine taste and odour from tap water.
Fluoride in Your Water
Fluoride measures 0.95 mg/L in Boat Harbour. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Flush After Absence
If your home has been unoccupied for several days, run the kitchen tap for 30 seconds before drinking. This clears stale water that has been sitting in pipes.
Get water quality alerts
We'll email you when Boat Harbour's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Boat Harbour?
How hard is the water in Boat Harbour?
What water utility supplies Boat Harbour?
Does Boat Harbour water have fluoride?
What is the water quality score for Boat Harbour?
What is the population of Boat Harbour?
Supplier
Water utility
- Utility
- Hunter Water
- Supply Zone
- Anna Bay/Nelson Bay
- Data Source
- Hunter Water — Monthly Water Quality Summary December 2025, Monthly Water Quality Summary January 2026
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.6 and 10.0
Utility reports average the grid — not your home
Boat Harbour's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Related
Explore more
Related pages for Boat Harbour, NSW
Is tap water safe?
Safety assessment
Best water filter
Filter recommendations
New South Wales water quality
State coverage
Hunter Water
Water utility
Compare with Anna Bay
Boat Harbour vs Anna Bay
Compare with Fishermans Bay
Boat Harbour vs Fishermans Bay
Compare with Taylors Beach
Boat Harbour vs Taylors Beach
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Hunter Water (2026 report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.