As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Tap Water Quality in Deakin University, VIC

Postcode 3217 · Supplied by Barwon Water via Doncaster

Current data · 2023-24 annual report

Quality Score

Share this page Twitter Facebook LinkedIn

About Deakin University

Deakin University is a suburb in Victoria, Australia (postcode 3217). It falls within the Barwon Water area.

Tap water in Deakin University is supplied by Barwon Water. The suburb receives water via the Doncaster, Barwon Water System supply zones.

Water quality summary

Based on 2023-24 water quality reports, Deakin University achieves a WaterScore of 9.4 out of 10, rated excellent overall. Water hardness measures 19 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.4, which is within the ADWG guideline range of 6.5–8.5. The water is fluoridated at 0.69 mg/L, within the recommended range of 0.6–1.1 mg/L for dental health, well under the ADWG maximum of 1.5 mg/L. Chlorine, used for disinfection, measures 0.31 mg/L — well within the ADWG guideline of 5 mg/L. Turbidity is 2.95 NTU, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.

Recommended filters for Deakin University

Products matched to your water profile

Our top pick
BRITA Marella 2.4L Fridge Water Filter Jug

BRITA

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

Budget-friendly Matched to Deakin University's water

A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Deakin University's water profile.

Waterdrop TSA 8-Layer Under-Sink Water Filter System

Waterdrop

TSA Under-Sink Filter (Fluoride + PFAS)

4.4 · 2,237 ratings on Amazon

Mid-range Matched to Deakin University's water

A reliable tsa under-sink filter (fluoride + pfas) suitable for Deakin University's water profile.

Purewell 8.5L Stainless Steel Gravity Water Filter System

Purewell

8.5L Stainless Steel Gravity System

4.4 · 1,137 ratings on Amazon

Mid-range Matched to Deakin University's water

A reliable 8.5l stainless steel gravity system suitable for Deakin University's water profile.

How Deakin University compares

Compared to Victoria and national averages

Metric Deakin University VIC Avg National Avg
Hardness 19 mg/L 28 mg/L 85.1 mg/L
pH 7.4 7.4 8.4
Fluoride 0.69 mg/L 0.7 mg/L 0.7 mg/L
Chlorine 0.31 mg/L
Turbidity 2.95 NTU 1.8 NTU 0.4 NTU
TDS 275.7 mg/L

Detailed water quality data

All values compared against Australian Drinking Water Guidelines (ADWG)

Parameter Value Unit ADWG Guideline Status
Trihalomethanes 0.07 mg/L < 0.25 Good
Turbidity 2.95 NTU < 5 Good
Copper 0.013 mg/L < 2 Good
Fluoride 0.69 mg/L < 1.5 Good
Lead 0.0003 mg/L < 0.01 Good
Iron 0.064 mg/L < 0.3 Good
Zinc 0.004 mg/L No limit Measured
Hardness 19 mg/L CaCO3 < 200 Good
E. coli 0 MPN/100mL < 0 Compliant
Free Chlorine 0.31 mg/L < 5 Good
pH 7.4 pH units 6.5 – 8.5 Normal

Safety assessment

Based on 11 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.

Based on comparison with Australian Drinking Water Guidelines (ADWG)

What these numbers mean

Soft (19 mg/L)

Water Hardness

Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.

Normal Range

pH Level

pH of 7.4 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.

Fluoridated

Fluoride

Fluoride at 0.69 mg/L. Within the recommended 0.6–1.1 mg/L range for dental health.

Chlorine

Disinfection

Chlorine measured at 0.31 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.

Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .

Practical tips for residents

Chlorine Levels Are Low

Chlorine in Deakin University measures 0.31 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.

Soft Water Advantage

Deakin University's water is soft at 19 mg/L. You can use less soap and detergent, as it lathers easily with softer water.

Fluoride in Your Water

Fluoride measures 0.69 mg/L in Deakin University. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.

Sediment Filtration

Turbidity is 2.95 NTU in Deakin University. A sediment pre-filter on your main line can help reduce fine particles and improve water clarity at the tap.

Get water quality alerts

We'll email you when Deakin University's water data is updated.

Frequently asked questions

Is tap water safe to drink in Deakin University?
Yes, tap water in Deakin University is generally safe to drink. It scores 9.4 out of 10 on the WaterScore scale based on ADWG compliance. Water is supplied by Barwon Water. Based on 11 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
How hard is the water in Deakin University?
Water hardness in Deakin University is 19 mg/L, classified as soft. Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
What water utility supplies Deakin University?
Deakin University is supplied by Barwon Water.
Does Deakin University water have fluoride?
Yes, water in Deakin University is fluoridated, with a fluoride level of 0.69 mg/L. This is within the recommended range for dental health.
What is the water quality score for Deakin University?
Deakin University has a WaterScore of 9.4 out of 10, rated excellent. This score is calculated by comparing water quality measurements against Australian Drinking Water Guidelines (ADWG) across parameters including hardness, pH, fluoride, chlorine, and turbidity.

Water utility

Utility
Barwon Water
Supply Zone
Doncaster
Data Source
Barwon Water — YVW Annual Water Quality Report 2023 24

Suburbs with similar water quality

Suburbs scoring between 8.4 and 10.0

Utility reports average the grid — not your home

Deakin University's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.

Check your own tap before buying a filter or assuming the suburb average matches your home.

Tetra EasyStrips 6-in-1 Water Quality Test Strips, 100-pack

Tetra

EasyStrips 6-in-1 Water Test (100 strips)

4.6 · 8,650 ratings on Amazon

Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.

Test my tap →

Sponsored Amazon link. Check Amazon for current price and availability.

Heavy Metals Drinking Water Test Kit (20 packs)

Heavy Metals

Drinking Water Test Kit (Lead, Copper, Iron, Mercury)

4.2 · 250 ratings on Amazon

20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.

Check metals kit →

Sponsored Amazon link. Check Amazon for current price and availability.

Explore more

Related pages for Deakin University, VIC

Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Barwon Water (2023-24 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.

!

Utility data stops before your tap

Check lead, copper and bacteria

Test tap