Ainslie vs Romsey

Name: Water Quality Comparison: Ainslie vs Romsey
Creator: WaterScore
License: https://creativecommons.org/licenses/by/4.0/

Side-by-side tap water quality comparison

Romsey, VIC

9.7

Quality Score

Supplied by Greater Western Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Ainslie scores 9.7/10 and Romsey scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Recommended for this suburb

Chlorine in Ainslie is 1 mg/L — above the taste threshold. That pool smell in every glass is real.

Chlorine is added on purpose (kills bugs in the pipes), but by the time it reaches your tap it ruins everything you taste. Tea takes on a medicinal edge. Kids turn down water and drink juice or soft drink instead. The usual family fix is bottled water, but a simple carbon filter is the cleaner daily habit. Worse, many filter pitchers go in the fridge and get ignored because they're slow.

BRITAOur pick

Marella 2.4L Fridge Water Filter Jug (Maxtra+)

4.7 · 16,095 ratings on Amazon

A BRITA Marella is the opposite: fast (2.4L, fills in under a minute), kid-friendly handle, fridge-door fit, replacement cartridges available everywhere in AU. Chlorine gone, taste clean, no plumber, no faff — this is the default answer for chlorine taste in Australia.

Kill the taste →

Sponsored Amazon link · we may earn a commission at no cost to you. Check Amazon for current price and availability.

Visual comparison

Ainslie, ACT

Romsey, VIC

Key metrics comparison

Hardness (mg/L)

Ainslie

37 Lower

Romsey

52 Higher

pH Level

Ainslie

7.5 Normal

Romsey

7.5 Normal

Fluoride (mg/L)

Ainslie

0.79 Higher

Romsey

0.06 Lower

Chlorine (mg/L)

Ainslie

1 Higher

Romsey

0.32 Lower

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter	Ainslie	Romsey	Unit	ADWG Guideline
Alkalinity	37 Measured	37 Measured	mg/L CaCO3	No limit
Aluminium	0.03 Good	0.01 Good	mg/L	< 0.2
Antimony	0.003 Measured	—	mg/L	No limit
Cadmium	0.00005 Measured	—	mg/L	No limit
Calcium	12.09 Measured	—	mg/L	No limit
Chloride	3.9 Good	—	mg/L	< 250
Chromium	0.002 Measured	—	mg/L	No limit
Colour	1 Good	3 Good	HU	< 15
Conductivity	123 Measured	—	µS/cm	No limit
Copper	0.013 Good	—	mg/L	< 2
Cyanide	0.004 Measured	—	mg/L	No limit
E. coli	0 Compliant	0 Compliant	MPN/100mL	< 0
Electrical Conductivity	—	257 Measured		No limit
Fluoride	0.79 Good	0.06 Good	mg/L	< 1.5
Free Chlorine	1 Good	0.32 Good	mg/L	< 5
Hardness	37 Good	52 Good	mg/L CaCO3	< 200
Iron	0.01 Good	0.01 Good	mg/L	< 0.3
Lead	0.0004 Good	—	mg/L	< 0.01
Magnesium	1.56 Measured	—	mg/L	No limit
Manganese	0.005 Good	0.003 Good	mg/L	< 0.1
Monochloramine	0.06 Good	—	mg/L	< 3
Nickel	0.001 Measured	—	mg/L	No limit
Nitrate	0.1 Good	0.11 Good	mg/L	< 50
pH	7.5 Normal	7.5 Normal	pH units	6.5 – 8.5
Sodium	3.8 Good	24.3 Good	mg/L	< 180
Sulfate	4.5 Good	—	mg/L	< 500
Temperature	17 Measured	—	°C	No limit
Total Chlorine	1.07 Good	1 Good	mg/L	< 5
Total Coliforms	0 Compliant	—	MPN/100mL	< 0
Total Dissolved Solids	74 Good	—	mg/L	< 600
Trihalomethanes	0.034 Good	0.039 Good	mg/L	< 0.25
Turbidity	0.3 Good	0.1 Good	NTU	< 5
Zinc	0.005 Measured	—	mg/L	No limit

Explore further

Ainslie

Romsey

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from Icon Water and Greater Western Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.