Tap Water Quality in Romsey, VIC
Postcode 3434 · Supplied by Greater Western Water via Romsey
Quality Score
About Romsey
Romsey is a suburb of 5,797 residents in Victoria (postcode 3434). The median age is 38. It falls within the Greater Western Water area. Neighbouring suburbs include Cherokee, Kerrie, Springfield, Monegeetta.
Most residents own their home with a mortgage (55%), while 32% own outright, while 11% rent. The median household income is $107,536 per year. The top countries of birth for residents are United Kingdom (41%), New Zealand (11%), and United States (4%).
Tap water in Romsey is supplied by Greater Western Water. The suburb receives water via the Romsey supply zone.
Water quality summary
Based on 2023-24 water quality reports, Romsey achieves a WaterScore of 9.7 out of 10, rated excellent overall. Water hardness measures 52 mg/L, classified as soft. This is gentle on appliances and skin, with minimal limescale buildup expected. The pH level is 7.5, which is within the ADWG guideline range of 6.5–8.5. Fluoride levels are very low at 0.06 mg/L, indicating the water is not significantly fluoridated. Chlorine, used for disinfection, measures 0.32 mg/L — well within the ADWG guideline of 5 mg/L. Turbidity is 0.1 NTU, indicating clear water, within the ADWG guideline of 5 NTU. E. coli was not detected in testing, meeting the ADWG standard for microbiological safety.
Compare with nearby suburbs: Cherokee , Kerrie , Springfield
Census Data
Suburb snapshot
Population
Median Age
Median Income
Owner-occupied
Recommended filters for Romsey
Products matched to your water profile
BRITA
Marella 2.4L Fridge Water Filter Jug (Maxtra+)
4.7 · 16,095 ratings on Amazon
A reliable marella 2.4l fridge water filter jug (maxtra+) suitable for Romsey's water profile.
ZeroWater
2.8L 5-Stage Jug (IAPMO Certified: PFOA/PFOS + Lead)
4.2 · 5,315 ratings on Amazon
A reliable 2.8l 5-stage jug (iapmo certified: pfoa/pfos + lead) suitable for Romsey's water profile.
Purewell
8.5L Stainless Steel Gravity System
4.4 · 1,137 ratings on Amazon
A reliable 8.5l stainless steel gravity system suitable for Romsey's water profile.
Comparison
How Romsey compares
Compared to Victoria and national averages
| Metric | Romsey | VIC Avg | National Avg |
|---|---|---|---|
| Hardness | 52 mg/L | 28 mg/L | 85.3 mg/L |
| pH | 7.5 | 7.4 | 7.8 |
| Fluoride | 0.06 mg/L | 0.7 mg/L | 0.7 mg/L |
| Chlorine | 0.32 mg/L | — | — |
| Turbidity | 0.1 NTU | 1.8 NTU | 0.4 NTU |
| TDS | — | — | 275.7 mg/L |
Full Results
Detailed water quality data
All values compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Value | Unit | ADWG Guideline | Status |
|---|---|---|---|---|
| Alkalinity | 37 | mg/L CaCO3 | No limit | Measured |
| Aluminium | 0.01 | mg/L | < 0.2 | Good |
| Free Chlorine | 0.32 | mg/L | < 5 | Good |
| Total Chlorine | 1 | mg/L | < 5 | Good |
| Colour | 3 | HU | < 15 | Good |
| E. coli | 0 | MPN/100mL | < 0 | Compliant |
| Electrical Conductivity | 257 | No limit | Measured | |
| Fluoride | 0.06 | mg/L | < 1.5 | Good |
| Hardness | 52 | mg/L CaCO3 | < 200 | Good |
| Iron | 0.01 | mg/L | < 0.3 | Good |
| Manganese | 0.003 | mg/L | < 0.1 | Good |
| Nitrate | 0.11 | mg/L | < 50 | Good |
| pH | 7.5 | pH units | 6.5 – 8.5 | Normal |
| Sodium | 24.3 | mg/L | < 180 | Good |
| Trihalomethanes | 0.039 | mg/L | < 0.25 | Good |
| Turbidity | 0.1 | NTU | < 5 | Good |
Safety
Safety assessment
Based on 16 parameters tested, all results fall within Australian Drinking Water Guidelines. E. coli was not detected, meeting the ADWG standard for microbiological safety.
Based on comparison with Australian Drinking Water Guidelines (ADWG)
Explained
What these numbers mean
Soft (52 mg/L)
Water Hardness
Your water is classified as soft, which means minimal limescale buildup on fixtures and appliances. Soap and shampoo will lather easily, and you should notice no drying effects on skin or hair. Hot water systems and kettles are unlikely to suffer scale-related efficiency losses.
Normal Range
pH Level
pH of 7.5 is within the ideal range of 6.5–8.5. The ADWG recommends pH between 6.5 and 8.5 for drinking water.
Low fluoride
Fluoride
Fluoride at 0.06 mg/L. Below the recommended range.
Chlorine
Disinfection
Chlorine measured at 0.32 mg/L, well within the ADWG guideline of 5 mg/L. Used for disinfection to keep water safe. May affect taste slightly — refrigerating water or using a carbon filter can help.
Learn more about these measurements in our water quality glossary — including Hardness , pH , Fluoride , and ADWG guidelines .
Advice
Practical tips for residents
Chlorine Levels Are Low
Chlorine in Romsey measures 0.32 mg/L, which is low. Filling a jug and letting it stand for 30 minutes will reduce any residual taste.
Soft Water Advantage
Romsey's water is soft at 52 mg/L. You can use less soap and detergent, as it lathers easily with softer water.
Fluoride in Your Water
Fluoride measures 0.06 mg/L in Romsey. Australian guidelines allow up to 1.5 mg/L. This is added by utilities to support dental health in the community.
Get water quality alerts
We'll email you when Romsey's water data is updated.
FAQ
Frequently asked questions
Is tap water safe to drink in Romsey?
How hard is the water in Romsey?
What water utility supplies Romsey?
Does Romsey water have fluoride?
What is the water quality score for Romsey?
What is the population of Romsey?
Supplier
Water utility
- Utility
- Greater Western Water
- Supply Zone
- Romsey
- Data Source
- Greater Western Water — GWW Annual Water Quality Report 2023 24
Nearby
Nearby suburbs
Same water utility, similar water quality
Similar Quality
Suburbs with similar water quality
Suburbs scoring between 8.7 and 10.0
Utility reports average the grid — not your home
Romsey's water meets ADWG standards at the source, but old pipes, roof tanks, and ageing plumbing can add lead, copper or bacteria before the water reaches your tap. These won't show up in your utility report.
Check your own tap before buying a filter or assuming the suburb average matches your home.
Tetra
EasyStrips 6-in-1 Water Test (100 strips)
4.6 · 8,650 ratings on Amazon
Tests 6 parameters in 60 seconds: hardness, chlorine, pH, nitrate, nitrite, alkalinity. Cheapest way to verify your utility data.
Test my tap →Sponsored Amazon link. Check Amazon for current price and availability.
Heavy Metals
Drinking Water Test Kit (Lead, Copper, Iron, Mercury)
4.2 · 250 ratings on Amazon
20 tests. Detects lead, copper, iron, mercury — the things utility reports miss. Mobile-app results, EPA-standard thresholds.
Check metals kit →Sponsored Amazon link. Check Amazon for current price and availability.
Guides for Melbourne
In-depth articles on the water supply that serves Romsey
Cite
Cite this page
Free to quote and reuse with a credit to WaterScore and a link to this page. Journalists and researchers can find key figures and contacts on our press and data page.
WaterScore. (2026). Tap water quality in Romsey, VIC [Data set]. Compiled from Greater Western Water data (2023-24 annual report). https://waterscore.com.au/water-quality/romsey-vic/
Embed
Add Romsey, VIC water data to your website
For plumbers, filter suppliers, cafés and real estate agents. Paste this code into your page to show the badge below, which links back to this report.
Related
Explore more
Related pages for Romsey, VIC
Disclaimer: The information on this page is for general informational purposes only and does not constitute medical advice, health recommendations, or professional guidance. Water quality data is sourced from Greater Western Water (2023-24 annual report) and reflects conditions at the time of utility testing — it may not reflect real-time water quality at your tap. Actual water quality can vary due to local plumbing, seasonal changes, and distance from the treatment plant. For specific health concerns, consult a qualified health professional. For the most current water quality information, contact your local water utility directly. See our Terms of Use.