Alberton vs Talawa

Side-by-side tap water quality comparison

Alberton, TAS

Quality Score

Supplied by TasWater

Talawa, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Alberton scores 9.7/10 and Talawa scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Alberton, TAS
Talawa, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Alberton Talawa Unit ADWG Guideline
Alkalinity 11.916667 Measured 15.571429 Measured mg/L No limit
Aluminium 0.021667 Good 0.01 Good mg/L < 0.2
Ammonia 0.002833 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 4.283333 Measured 1.925 Measured mg/L No limit
Chloride 10.5 Good 13.5 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.25 Good 2 Good Pt-Co < 15
Conductivity 70.916667 Measured 133.571429 Measured uS/cm No limit
Copper 0.004846 Good 0.002125 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.806667 Good 0.846667 Good mg/L < 1.5
Free Chlorine 0.88446 Good 0.925657 Good mg/L < 5
Hardness 13.166667 Good 9.928571 Good mg/L < 200
Iron 0.01 Good 0.01 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 0.491667 Measured 1.1 Measured mg/L No limit
Manganese 0.001 Good 0.002375 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.206667 Good 0.547357 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.369858 Normal 7.347071 Normal pH units 6.5 – 8.5
Sodium 7.066667 Good 16.2 Good mg/L < 180
Sulfate 1 Good 20.5 Good mg/L < 500
Temperature 13.681534 Measured 12.623232 Measured degrees C No limit
Total Chlorine 1.1425 Good 1.105 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 44.416667 Good 80.142857 Good mg/L < 600
Trihalomethanes 0.05375 Good 0.01 Good mg/L < 0.25
Turbidity 0.194602 Good 0.241616 Good NTU < 5
Zinc 0.010192 Measured 0.002625 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.