Andover vs York Plains

Side-by-side tap water quality comparison

Andover, TAS

Quality Score

Supplied by TasWater

York Plains, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Andover scores 9.6/10 and York Plains scores 9.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Andover, TAS
York Plains, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Andover York Plains Unit ADWG Guideline
Alkalinity 47.428571 Measured 40.642857 Measured mg/L No limit
Aluminium 0.0375 Good 0.035 Good mg/L < 0.2
Ammonia 0.003857 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 6.8 Measured 7.066667 Measured mg/L No limit
Chloride 32.25 Good 17.333333 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.285714 Good 2.142857 Good Pt-Co < 15
Conductivity 304.285714 Measured 192.857143 Measured uS/cm No limit
Copper 0.003 Good 0.0025 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.85 Good 0.976667 Good mg/L < 1.5
Free Chlorine 0.609487 Good 0.924758 Good mg/L < 5
Hardness 36.428571 Good 28.571429 Good mg/L < 200
Iron 0.01 Good 0.01 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 4.65 Measured 2.966667 Measured mg/L No limit
Manganese 0.001875 Good 0.001333 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.080143 Good 0.079714 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.396026 Normal 7.395161 Normal pH units 6.5 – 8.5
Sodium 45.75 Good 26.166667 Good mg/L < 180
Sulfate 38.857143 Good 26.357143 Good mg/L < 500
Temperature 14.442308 Measured 12.342742 Measured degrees C No limit
Total Chlorine 0.721111 Good 1.291667 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 163.571429 Good 110.142857 Good mg/L < 600
Trihalomethanes 0.0665 Good 0.062 Good mg/L < 0.25
Turbidity 0.350128 Good 0.313065 Good NTU < 5
Zinc 0.00225 Measured 0.002917 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.