Bagdad vs Pontville

Side-by-side tap water quality comparison

Bagdad, TAS

Quality Score

Supplied by TasWater

Pontville, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Bagdad scores 9.6/10 and Pontville scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Bagdad, TAS
Pontville, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Bagdad Pontville Unit ADWG Guideline
Alkalinity 26.142857 Measured 26.142857 Measured mg/L No limit
Aluminium 0.036667 Good 0.036667 Good mg/L < 0.2
Ammonia 0.003571 Measured 0.003571 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 17.666667 Measured 17.666667 Measured mg/L No limit
Chloride 9.666667 Good 9.666667 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2 Good 2 Good Pt-Co < 15
Conductivity 135.714286 Measured 135.714286 Measured uS/cm No limit
Copper 0.001 Good 0.001 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.913333 Good 0.926667 Good mg/L < 1.5
Free Chlorine 0.414032 Good 0.75535 Good mg/L < 5
Hardness 49 Good 49 Good mg/L < 200
Iron 0.01 Good 0.01 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 1.433333 Measured 1.433333 Measured mg/L No limit
Manganese 0.001 Good 0.001 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.051143 Good 0.051143 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 8.073952 Normal 7.381643 Normal pH units 6.5 – 8.5
Sodium 4.666667 Good 4.666667 Good mg/L < 180
Sulfate 23 Good 23 Good mg/L < 500
Temperature 13.65 Measured 13.423427 Measured degrees C No limit
Total Chlorine 0.305 Good 0.305 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 78.285714 Good 78.285714 Good mg/L < 600
Trihalomethanes 0.057 Good 0.057 Good mg/L < 0.25
Turbidity 0.292016 Good 0.238007 Good NTU < 5
Zinc 0.002333 Measured 0.002333 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.