Bellerive vs Howrah

Side-by-side tap water quality comparison

Bellerive, TAS

Quality Score

Supplied by TasWater

Howrah, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Bellerive scores 9.8/10 and Howrah scores 9.8/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHChlorineTurbidity
Bellerive, TAS
Howrah, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Bellerive Howrah Unit ADWG Guideline
Alkalinity 19.727273 Measured 19.727273 Measured mg/L No limit
Aluminium 0.033333 Good 0.033333 Good mg/L < 0.2
Ammonia 0.002182 Measured 0.002182 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 16.666667 Measured 16.666667 Measured mg/L No limit
Chloride 10.111111 Good 10.111111 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.238095 Good 2.238095 Good Pt-Co < 15
Conductivity 121.363636 Measured 121.363636 Measured uS/cm No limit
Copper 0.007944 Good 0.007944 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Free Chlorine 0.829548 Good 0.829548 Good mg/L < 5
Hardness 46.285714 Good 46.285714 Good mg/L < 200
Iron 0.012222 Good 0.012222 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 2.511111 Measured 2.511111 Measured mg/L No limit
Manganese 0.001111 Good 0.001111 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.040409 Good 0.040409 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.414137 Normal 7.414137 Normal pH units 6.5 – 8.5
Sodium 4.333333 Good 4.333333 Good mg/L < 180
Sulfate 20 Good 20 Good mg/L < 500
Temperature 13.944521 Measured 13.944521 Measured degrees C No limit
Total Chlorine 0.966842 Good 0.966842 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 75.285714 Good 75.285714 Good mg/L < 600
Trihalomethanes 0.027556 Good 0.027556 Good mg/L < 0.25
Turbidity 0.310575 Good 0.310575 Good NTU < 5
Zinc 0.004056 Measured 0.004056 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.