Bicheno vs Douglas-Apsley

Side-by-side tap water quality comparison

Bicheno, TAS

Quality Score

Supplied by TasWater

Douglas-Apsley, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Bicheno scores 9.7/10 and Douglas-Apsley scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Bicheno, TAS
Douglas-Apsley, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Bicheno Douglas-Apsley Unit ADWG Guideline
Alkalinity 35 Measured 35 Measured mg/L No limit
Aluminium 0.02125 Good 0.02125 Good mg/L < 0.2
Ammonia 0.002 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 5.475 Measured 5.475 Measured mg/L No limit
Chloride 27.25 Good 27.25 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.25 Good 2.25 Good Pt-Co < 15
Conductivity 189.166667 Measured 189.166667 Measured uS/cm No limit
Copper 0.00175 Good 0.00175 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.906667 Good 0.906667 Good mg/L < 1.5
Free Chlorine 0.974362 Good 0.974362 Good mg/L < 5
Hardness 31 Good 31 Good mg/L < 200
Iron 0.01125 Good 0.01125 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 4.475 Measured 4.475 Measured mg/L No limit
Manganese 0.001 Good 0.001 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.004167 Good 0.004167 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.43129 Normal 7.43129 Normal pH units 6.5 – 8.5
Sodium 16 Good 16 Good mg/L < 180
Sulfate 11 Good 11 Good mg/L < 500
Temperature 15.443011 Measured 15.443011 Measured degrees C No limit
Total Chlorine 1.123571 Good 1.123571 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 113.916667 Good 113.916667 Good mg/L < 600
Trihalomethanes 0.02425 Good 0.02425 Good mg/L < 0.25
Turbidity 0.273333 Good 0.273333 Good NTU < 5
Zinc 0.00375 Measured 0.00375 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.