Bishopsbourne vs Cressy

Side-by-side tap water quality comparison

Bishopsbourne, TAS

Quality Score

Supplied by TasWater

Cressy, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Bishopsbourne scores 9.6/10 and Cressy scores 9.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Bishopsbourne, TAS
Cressy, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Bishopsbourne Cressy Unit ADWG Guideline
Alkalinity 29.166667 Measured 29.166667 Measured mg/L No limit
Aluminium 0.040833 Good 0.040833 Good mg/L < 0.2
Ammonia 0.003556 Measured 0.003556 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 12.3 Measured 12.3 Measured mg/L No limit
Chloride 37 Good 37 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.555556 Good 2.555556 Good Pt-Co < 15
Conductivity 211.833333 Measured 211.833333 Measured uS/cm No limit
Copper 0.003083 Good 0.003083 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.81 Good 0.81 Good mg/L < 1.5
Free Chlorine 0.797453 Good 0.797453 Good mg/L < 5
Hardness 44.555556 Good 44.555556 Good mg/L < 200
Iron 0.010833 Good 0.010833 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 5 Measured 5 Measured mg/L No limit
Manganese 0.00725 Good 0.00725 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.161353 Good 0.161353 Good mg/L < 50
Nitrite 0.002444 Measured 0.002444 Measured mg/L No limit
pH 7.359091 Normal 7.359091 Normal pH units 6.5 – 8.5
Sodium 23.143143 Good 23.143143 Good mg/L < 180
Sulfate 26.888889 Good 26.888889 Good mg/L < 500
Temperature 14.624242 Measured 14.624242 Measured degrees C No limit
Total Chlorine 0.982381 Good 0.982381 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 121.777778 Good 121.777778 Good mg/L < 600
Trihalomethanes 0.035167 Good 0.035167 Good mg/L < 0.25
Turbidity 0.274727 Good 0.274727 Good NTU < 5
Zinc 0.006667 Measured 0.006667 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.