Black Hills vs Derwent Bridge

Side-by-side tap water quality comparison

Black Hills, TAS

Quality Score

Supplied by TasWater

Derwent Bridge, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Black Hills scores 9.8/10 and Derwent Bridge scores 9.8/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHChlorineTurbidity
Black Hills, TAS
Derwent Bridge, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Black Hills Derwent Bridge Unit ADWG Guideline
Alkalinity 22.214286 Measured 22.214286 Measured mg/L No limit
Aluminium 0.033333 Good 0.033333 Good mg/L < 0.2
Ammonia 0.002 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 15.75 Measured 15.75 Measured mg/L No limit
Chloride 10 Good 10 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2 Good 2 Good Pt-Co < 15
Conductivity 125 Measured 125 Measured uS/cm No limit
Copper 0.001083 Good 0.001083 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Free Chlorine 0.495192 Good 0.495192 Good mg/L < 5
Hardness 45.857143 Good 45.857143 Good mg/L < 200
Iron 0.01 Good 0.01 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 1.775 Measured 1.775 Measured mg/L No limit
Manganese 0.001 Good 0.001 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.046214 Good 0.046214 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.559231 Normal 7.559231 Normal pH units 6.5 – 8.5
Sodium 5.15 Good 5.15 Good mg/L < 180
Sulfate 25.714286 Good 25.714286 Good mg/L < 500
Temperature 13.251282 Measured 13.251282 Measured degrees C No limit
Total Chlorine 0.6625 Good 0.6625 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 82.714286 Good 82.714286 Good mg/L < 600
Trihalomethanes 0.030333 Good 0.030333 Good mg/L < 0.25
Turbidity 0.224103 Good 0.224103 Good NTU < 5
Zinc 0.001417 Measured 0.001417 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.