Bracknell vs Katoomba

Side-by-side tap water quality comparison

Bracknell, TAS

Quality Score

Supplied by TasWater

Katoomba, NSW

Quality Score

Supplied by Sydney Water

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Bracknell scores 9.8/10 and Katoomba scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHChlorineTurbidity
Bracknell, TAS
Katoomba, NSW

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Bracknell Katoomba Unit ADWG Guideline
Alkalinity 21.666667 Measured — mg/L No limit
Aluminium 0.01 Good 0.017 Good mg/L < 0.2
Ammonia 0.002 Measured 0.001 Measured mg/L No limit
Antimony 0.001 Measured — mg/L No limit
Arsenic 0.001 Measured — mg/L No limit
Cadmium 0.0002 Measured — mg/L No limit
Calcium 3.9 Measured — mg/L No limit
Chloride 11 Good 0.004 Good mg/L < 250
Chromium 0.001 Measured — mg/L No limit
Colour 2.333333 Good 2 Good Pt-Co < 15
Conductivity 124.166667 Measured — uS/cm No limit
Copper 0.00175 Good 0.014 Good mg/L < 2
Cyanide 0.005 Measured — mg/L No limit
Dissolved Oxygen — 87.9 Measured % saturation No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride — 1.04 Good mg/L < 1.5
Free Chlorine 0.957879 Good 1.06 Good mg/L < 5
Hardness 13.916667 Good 38.1 Good mg/L < 200
Iron 0.01 Good 0.016 Good mg/L < 0.3
Lead 0.001 Good — mg/L < 0.01
Magnesium 1.275 Measured — mg/L No limit
Manganese 0.00175 Good 0.0031 Good mg/L < 0.1
Mercury 0.0001 Measured — mg/L No limit
Monochloramine — 0.07 Good mg/L < 3
Ndma — 0.0001 Measured mg/L No limit
Nickel 0.001 Measured — mg/L No limit
Nitrate 0.112667 Good — mg/L < 50
Nitrite 0.002 Measured — mg/L No limit
PFOA — 0.0001 Good µg/L < 0.2
PFOS + PFHxS — 0.0026 Good µg/L PFOS < 0.008, PFHxS < 0.03
pH 7.399848 Normal 7.7 Normal pH units 6.5 – 8.5
Sodium 18 Good — mg/L < 180
Sulfate 21 Good 0.9 Good mg/L < 500
Temperature 13.239394 Measured 16.1 Measured degrees C No limit
Total Chlorine 1.115 Good — mg/L < 5
Total Coliforms 0 Compliant — MPN/100ml < 0
Total Dissolved Solids 78.166667 Good 92.5 Good mg/L < 600
Trihalomethanes 0.02325 Good 0.03 Good mg/L < 0.25
Turbidity 0.247121 Good 0.17 Good NTU < 5
Zinc 0.00275 Measured 0.005 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater and Sydney Water. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.