Breona vs Kimberley

Side-by-side tap water quality comparison

Breona, TAS

Quality Score

Supplied by TasWater

Kimberley, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Breona scores 9.6/10 and Kimberley scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Breona, TAS
Kimberley, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Breona Kimberley Unit ADWG Guideline
Alkalinity 17.157895 Measured 6.333333 Measured mg/L No limit
Aluminium 0.023333 Good 0.067222 Good mg/L < 0.2
Ammonia 0.002211 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 13.4 Measured 8.477778 Measured mg/L No limit
Chloride 25 Good 6.555556 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.526316 Good 2.047619 Good Pt-Co < 15
Conductivity 167.222222 Measured 79.190476 Measured uS/cm No limit
Copper 0.00775 Good 0.001056 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.983333 Good 0.88 Good mg/L < 1.5
Free Chlorine 0.767982 Good 1.022525 Good mg/L < 5
Hardness 45.894737 Good 22.944444 Good mg/L < 200
Iron 0.018333 Good 0.012778 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 3.671429 Measured 0.677778 Measured mg/L No limit
Manganese 0.00425 Good 0.002333 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.244337 Good 0.043429 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.330935 Normal 7.560606 Normal pH units 6.5 – 8.5
Sodium 9.8625 Good 3.622222 Good mg/L < 180
Sulfate 19.473684 Good 15.952381 Good mg/L < 500
Temperature 14.33192 Measured 13.287879 Measured degrees C No limit
Total Chlorine 1.02 Good 1.125556 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 101.444444 Good 52.333333 Good mg/L < 600
Trihalomethanes 0.051571 Good 0.044222 Good mg/L < 0.25
Turbidity 0.369509 Good 0.297677 Good NTU < 5
Zinc 0.007417 Measured 0.003889 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.