Bushy Park vs Ellendale

Side-by-side tap water quality comparison

Bushy Park, TAS

Quality Score

Supplied by TasWater

Ellendale, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Bushy Park scores 9.7/10 and Ellendale scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHChlorineTurbidity
Bushy Park, TAS
Ellendale, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Bushy Park Ellendale Unit ADWG Guideline
Alkalinity 10.875 Measured 13 Measured mg/L No limit
Aluminium 0.086667 Good 0.045 Good mg/L < 0.2
Ammonia 0.002 Measured 0.002429 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 5.083333 Measured 5.025 Measured mg/L No limit
Chloride 10.833333 Good 11.25 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.074074 Good 2.285714 Good Pt-Co < 15
Conductivity 66.666667 Measured 72.714286 Measured uS/cm No limit
Copper 0.002167 Good 0.00225 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.786667 Good mg/L < 1.5
Free Chlorine 0.800937 Good 0.651613 Good mg/L < 5
Hardness 15.944444 Good 16.857143 Good mg/L < 200
Iron 0.01 Good 0.02125 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 0.7 Measured 0.95 Measured mg/L No limit
Manganese 0.001 Good 0.001 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.0065 Good 0.012571 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.459766 Normal 7.687097 Normal pH units 6.5 – 8.5
Sodium 5.333333 Good 7.175 Good mg/L < 180
Sulfate 1.380952 Good 1 Good mg/L < 500
Temperature 12.648438 Measured 12.790323 Measured degrees C No limit
Total Chlorine 0.980455 Good 0.988333 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 45 Good 44.285714 Good mg/L < 600
Trihalomethanes 0.070111 Good 0.100769 Good mg/L < 0.25
Turbidity 0.320859 Good 0.460323 Good NTU < 5
Zinc 0.001917 Measured 0.002375 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.