Cape Portland vs Eddystone Point

Side-by-side tap water quality comparison

Cape Portland, TAS

Quality Score

Supplied by TasWater

Eddystone Point, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Cape Portland scores 9.8/10 and Eddystone Point scores 9.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHChlorineTurbidity
Cape Portland, TAS
Eddystone Point, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Cape Portland Eddystone Point Unit ADWG Guideline
Alkalinity 10.571429 Measured 26.666667 Measured mg/L No limit
Aluminium 0.0175 Good 0.0275 Good mg/L < 0.2
Ammonia 0.002 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 3.475 Measured 3.325 Measured mg/L No limit
Chloride 21.5 Good 18.25 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.142857 Good 2.166667 Good Pt-Co < 15
Conductivity 104.285714 Measured 180 Measured uS/cm No limit
Copper 0.00575 Good 0.001875 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.86 Good mg/L < 1.5
Free Chlorine 0.727121 Good 1.132424 Good mg/L < 5
Hardness 16.142857 Good 13.5 Good mg/L < 200
Iron 0.01 Good 0.01125 Good mg/L < 0.3
Lead 0.001 Good 0.001125 Good mg/L < 0.01
Magnesium 2.25 Measured 1.45 Measured mg/L No limit
Manganese 0.001 Good 0.002625 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.46 Good 0.239167 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.203182 Normal 7.262424 Normal pH units 6.5 – 8.5
Sodium 14 Good 29.5 Good mg/L < 180
Sulfate 2.928571 Good 29.916667 Good mg/L < 500
Temperature 15.245455 Measured 14.536364 Measured degrees C No limit
Total Chlorine 0.797857 Good 1.234286 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 66.642857 Good 111.25 Good mg/L < 600
Trihalomethanes 0.02875 Good 0.03025 Good mg/L < 0.25
Turbidity 0.216061 Good 0.333636 Good NTU < 5
Zinc 0.0035 Measured 0.002 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.