Douglas-Apsley vs St Marys

Side-by-side tap water quality comparison

Douglas-Apsley, TAS

Quality Score

Supplied by TasWater

St Marys, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Douglas-Apsley scores 9.7/10 and St Marys scores 9.5/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Douglas-Apsley, TAS
St Marys, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Douglas-Apsley St Marys Unit ADWG Guideline
Alkalinity 35 Measured 146.666667 Measured mg/L No limit
Aluminium 0.02125 Good 0.01 Good mg/L < 0.2
Ammonia 0.002 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 5.475 Measured 55.5 Measured mg/L No limit
Chloride 27.25 Good 33 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.25 Good 2.166667 Good Pt-Co < 15
Conductivity 189.166667 Measured 411.666667 Measured uS/cm No limit
Copper 0.00175 Good 0.0115 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.906667 Good 0.943333 Good mg/L < 1.5
Free Chlorine 0.974362 Good 0.792576 Good mg/L < 5
Hardness 31 Good 153.333333 Good mg/L < 200
Iron 0.01125 Good 0.0275 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 4.475 Measured 4.95 Measured mg/L No limit
Manganese 0.001 Good 0.00325 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.004167 Good 0.007333 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.43129 Normal 7.10697 Normal pH units 6.5 – 8.5
Sodium 16 Good 17 Good mg/L < 180
Sulfate 11 Good 14.333333 Good mg/L < 500
Temperature 15.443011 Measured 13.442424 Measured degrees C No limit
Total Chlorine 1.123571 Good 1 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 113.916667 Good 231.666667 Good mg/L < 600
Trihalomethanes 0.02425 Good 0.0115 Good mg/L < 0.25
Turbidity 0.273333 Good 0.57303 Good NTU < 5
Zinc 0.00375 Measured 0.0045 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.