Ellendale vs National Park

Side-by-side tap water quality comparison

Ellendale, TAS

Quality Score

Supplied by TasWater

National Park, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Ellendale scores 9.7/10 and National Park scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHChlorineTurbidity
Ellendale, TAS
National Park, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Ellendale National Park Unit ADWG Guideline
Alkalinity 13 Measured 16.25 Measured mg/L No limit
Aluminium 0.045 Good 0.05625 Good mg/L < 0.2
Ammonia 0.002429 Measured 0.002917 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 5.025 Measured 6.75 Measured mg/L No limit
Chloride 11.25 Good 13 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.285714 Good 2.166667 Good Pt-Co < 15
Conductivity 72.714286 Measured 86.5 Measured uS/cm No limit
Copper 0.00225 Good 0.003 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Free Chlorine 0.651613 Good 0.893387 Good mg/L < 5
Hardness 16.857143 Good 20.5 Good mg/L < 200
Iron 0.02125 Good 0.0125 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 0.95 Measured 0.775 Measured mg/L No limit
Manganese 0.001 Good 0.001375 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.012571 Good 0.0035 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.687097 Normal 7.63629 Normal pH units 6.5 – 8.5
Sodium 7.175 Good 7.95 Good mg/L < 180
Sulfate 1 Good 1.166667 Good mg/L < 500
Temperature 12.790323 Measured 11.054839 Measured degrees C No limit
Total Chlorine 0.988333 Good 1.001667 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 44.285714 Good 52.416667 Good mg/L < 600
Trihalomethanes 0.100769 Good 0.04675 Good mg/L < 0.25
Turbidity 0.460323 Good 0.305323 Good NTU < 5
Zinc 0.002375 Measured 0.002875 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.