Elliott vs Myalla

Side-by-side tap water quality comparison

Elliott, TAS

Quality Score

Supplied by TasWater

Myalla, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Elliott scores 9.7/10 and Myalla scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Elliott, TAS
Myalla, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Elliott Myalla Unit ADWG Guideline
Alkalinity 17 Measured 17 Measured mg/L No limit
Aluminium 0.010833 Good 0.010833 Good mg/L < 0.2
Ammonia 0.002 Measured 0.002 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 4.133333 Measured 4.133333 Measured mg/L No limit
Chloride 9.333333 Good 9.333333 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.214286 Good 2.214286 Good Pt-Co < 15
Conductivity 72.785714 Measured 72.785714 Measured uS/cm No limit
Copper 0.00475 Good 0.00475 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.776667 Good 0.776667 Good mg/L < 1.5
Free Chlorine 0.991368 Good 0.991368 Good mg/L < 5
Hardness 16.428571 Good 16.428571 Good mg/L < 200
Iron 0.0125 Good 0.0125 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 1.683333 Measured 1.683333 Measured mg/L No limit
Manganese 0.001 Good 0.001 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.0155 Good 0.0155 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.447579 Normal 7.447579 Normal pH units 6.5 – 8.5
Sodium 6.8 Good 6.8 Good mg/L < 180
Sulfate 1.285714 Good 1.285714 Good mg/L < 500
Temperature 11.776842 Measured 11.776842 Measured degrees C No limit
Total Chlorine 1.041667 Good 1.041667 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 44 Good 44 Good mg/L < 600
Trihalomethanes 0.047167 Good 0.047167 Good mg/L < 0.25
Turbidity 0.243684 Good 0.243684 Good NTU < 5
Zinc 0.001333 Measured 0.001333 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.