Fentonbury vs National Park

Side-by-side tap water quality comparison

Fentonbury, TAS

Quality Score

Supplied by TasWater

National Park, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Fentonbury scores 9.6/10 and National Park scores 9.7/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHChlorineTurbidity
Fentonbury, TAS
National Park, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Fentonbury National Park Unit ADWG Guideline
Alkalinity 11.714286 Measured 16.25 Measured mg/L No limit
Aluminium 0.045 Good 0.05625 Good mg/L < 0.2
Ammonia 0.003143 Measured 0.002917 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 5.2625 Measured 6.75 Measured mg/L No limit
Chloride 12 Good 13 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.642857 Good 2.166667 Good Pt-Co < 15
Conductivity 72.5 Measured 86.5 Measured uS/cm No limit
Copper 0.006375 Good 0.003 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.784848 Good mg/L < 1.5
Free Chlorine 0.985484 Good 0.893387 Good mg/L < 5
Hardness 16.071429 Good 20.5 Good mg/L < 200
Iron 0.02 Good 0.0125 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 0.7375 Measured 0.775 Measured mg/L No limit
Manganese 0.001 Good 0.001375 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.005071 Good 0.0035 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.658387 Normal 7.63629 Normal pH units 6.5 – 8.5
Sodium 6.95 Good 7.95 Good mg/L < 180
Sulfate 1.071429 Good 1.166667 Good mg/L < 500
Temperature 11.756452 Measured 11.054839 Measured degrees C No limit
Total Chlorine 1.2175 Good 1.001667 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 44.928571 Good 52.416667 Good mg/L < 600
Trihalomethanes 0.099 Good 0.04675 Good mg/L < 0.25
Turbidity 0.388871 Good 0.305323 Good NTU < 5
Zinc 0.004938 Measured 0.002875 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.