Fern Tree vs Neika
Side-by-side tap water quality comparison
Which suburb has better water?
Neika has better water quality with a score of 9.7/10 compared to Fern Tree's 9.1/10. Neika has softer water (17.5 vs 23.62963 mg/L).
Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.
Visual comparison
Key metrics comparison
Full water quality comparison
All parameters compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Fern Tree | Neika | Unit | ADWG Guideline |
|---|---|---|---|---|
| Alkalinity | 11.655172 Measured | 9 Measured | mg/L | No limit |
| Aluminium | 0.027727 Good | 0.016429 Good | mg/L | < 0.2 |
| Ammonia | 0.002069 Measured | 0.002263 Measured | mg/L | No limit |
| Antimony | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Arsenic | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Cadmium | 0.0002 Measured | 0.0002 Measured | mg/L | No limit |
| Calcium | 8.218182 Measured | 4.9 Measured | mg/L | No limit |
| Chloride | 9.454545 Good | 7.428571 Good | mg/L | < 250 |
| Chromium | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Colour | 2.642857 Good | 2.473684 Good | Pt-Co | < 15 |
| Conductivity | 75.827586 Measured | 59.368421 Measured | uS/cm | No limit |
| Copper | 0.009318 Good | 0.007714 Good | mg/L | < 2 |
| Cyanide | 0.005 Measured | 0.005 Measured | mg/L | No limit |
| E. coli | 0 Compliant | 0 Compliant | MPN/100ml | < 0 |
| Fluoride | 0.928333 Good | 0.953333 Good | mg/L | < 1.5 |
| Free Chlorine | 0.815378 Good | 0.762816 Good | mg/L | < 5 |
| Hardness | 23.62963 Good | 17.5 Good | mg/L | < 200 |
| Iron | 0.02 Good | 0.026429 Good | mg/L | < 0.3 |
| Lead | 0.001 Good | 0.001 Good | mg/L | < 0.01 |
| Magnesium | 1.336364 Measured | 1.057143 Measured | mg/L | No limit |
| Manganese | 0.002045 Good | 0.001786 Good | mg/L | < 0.1 |
| Mercury | 0.0001 Measured | 0.0001 Measured | mg/L | No limit |
| Nickel | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Nitrate | 0.036897 Good | 0.009158 Good | mg/L | < 50 |
| Nitrite | 0.002 Measured | 0.002 Measured | mg/L | No limit |
| pH | 7.093328 Normal | 7.125666 Normal | pH units | 6.5 – 8.5 |
| Sodium | 3.572727 Good | 3.171429 Good | mg/L | < 180 |
| Sulfate | 8.344828 Good | 3.578947 Good | mg/L | < 500 |
| Temperature | 13.052234 Measured | 13.215529 Measured | degrees C | No limit |
| Total Chlorine | 1.214444 Good | 0.9255 Good | mg/L | < 5 |
| Total Coliforms | 4.790469 Detected | 0 Compliant | MPN/100ml | < 0 |
| Total Dissolved Solids | 49.148148 Good | 38.789474 Good | mg/L | < 600 |
| Trihalomethanes | 0.022818 Good | 0.04 Good | mg/L | < 0.25 |
| Turbidity | 0.715031 Good | 0.481092 Good | NTU | < 5 |
| Zinc | 0.004091 Measured | 0.004 Measured | mg/L | No limit |
Explore further
Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.