Fern Tree vs Nierinna
Side-by-side tap water quality comparison
Which suburb has better water?
Nierinna has better water quality with a score of 9.7/10 compared to Fern Tree's 9.1/10. Nierinna has softer water (22.645161 vs 23.62963 mg/L).
Based on ADWG compliance across all measured parameters. Both suburbs receive treated, safe drinking water.
Visual comparison
Key metrics comparison
Full water quality comparison
All parameters compared against Australian Drinking Water Guidelines (ADWG)
| Parameter | Fern Tree | Nierinna | Unit | ADWG Guideline |
|---|---|---|---|---|
| Alkalinity | 11.655172 Measured | 37 Measured | mg/L | No limit |
| Aluminium | 0.027727 Good | 0.017391 Good | mg/L | < 0.2 |
| Ammonia | 0.002069 Measured | 0.002129 Measured | mg/L | No limit |
| Antimony | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Arsenic | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Cadmium | 0.0002 Measured | 0.0002 Measured | mg/L | No limit |
| Calcium | 8.218182 Measured | 5.541667 Measured | mg/L | No limit |
| Chloride | 9.454545 Good | 13 Good | mg/L | < 250 |
| Chromium | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Colour | 2.642857 Good | 2.322581 Good | Pt-Co | < 15 |
| Conductivity | 75.827586 Measured | 204 Measured | uS/cm | No limit |
| Copper | 0.009318 Good | 0.006739 Good | mg/L | < 2 |
| Cyanide | 0.005 Measured | 0.005 Measured | mg/L | No limit |
| E. coli | 0 Compliant | 0 Compliant | MPN/100ml | < 0 |
| Fluoride | 0.928333 Good | 0.846667 Good | mg/L | < 1.5 |
| Free Chlorine | 0.815378 Good | 0.940937 Good | mg/L | < 5 |
| Hardness | 23.62963 Good | 22.645161 Good | mg/L | < 200 |
| Iron | 0.02 Good | 0.015217 Good | mg/L | < 0.3 |
| Lead | 0.001 Good | 0.001 Good | mg/L | < 0.01 |
| Magnesium | 1.336364 Measured | 2.55 Measured | mg/L | No limit |
| Manganese | 0.002045 Good | 0.002217 Good | mg/L | < 0.1 |
| Mercury | 0.0001 Measured | 0.0001 Measured | mg/L | No limit |
| Nickel | 0.001 Measured | 0.001 Measured | mg/L | No limit |
| Nitrate | 0.036897 Good | 0.00929 Good | mg/L | < 50 |
| Nitrite | 0.002 Measured | 0.002 Measured | mg/L | No limit |
| pH | 7.093328 Normal | 7.591733 Normal | pH units | 6.5 – 8.5 |
| Sodium | 3.572727 Good | 28.375 Good | mg/L | < 180 |
| Sulfate | 8.344828 Good | 37.258065 Good | mg/L | < 500 |
| Temperature | 13.052234 Measured | 12.709091 Measured | degrees C | No limit |
| Total Chlorine | 1.214444 Good | 1 Good | mg/L | < 5 |
| Total Coliforms | 4.790469 Detected | 0 Compliant | MPN/100ml | < 0 |
| Total Dissolved Solids | 49.148148 Good | 120.064516 Good | mg/L | < 600 |
| Trihalomethanes | 0.022818 Good | 0.040364 Good | mg/L | < 0.25 |
| Turbidity | 0.715031 Good | 0.302833 Good | NTU | < 5 |
| Zinc | 0.004091 Measured | 0.004435 Measured | mg/L | No limit |
Explore further
Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.