George Town vs Low Head

Side-by-side tap water quality comparison

George Town, TAS

Quality Score

Supplied by TasWater

Low Head, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! George Town scores 9.6/10 and Low Head scores 9.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
George Town, TAS
Low Head, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter George Town Low Head Unit ADWG Guideline
Alkalinity 17.157895 Measured 17.157895 Measured mg/L No limit
Aluminium 0.023333 Good 0.023333 Good mg/L < 0.2
Ammonia 0.002211 Measured 0.002211 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 13.4 Measured 13.4 Measured mg/L No limit
Chloride 25 Good 25 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.526316 Good 2.526316 Good Pt-Co < 15
Conductivity 167.222222 Measured 167.222222 Measured uS/cm No limit
Copper 0.00775 Good 0.00775 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.983333 Good 0.983333 Good mg/L < 1.5
Free Chlorine 0.767982 Good 0.767982 Good mg/L < 5
Hardness 45.894737 Good 45.894737 Good mg/L < 200
Iron 0.018333 Good 0.018333 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 3.671429 Measured 3.671429 Measured mg/L No limit
Manganese 0.00425 Good 0.00425 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.244337 Good 0.244337 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.330935 Normal 7.330935 Normal pH units 6.5 – 8.5
Sodium 9.8625 Good 9.8625 Good mg/L < 180
Sulfate 19.473684 Good 19.473684 Good mg/L < 500
Temperature 14.33192 Measured 14.33192 Measured degrees C No limit
Total Chlorine 1.02 Good 1.02 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 101.444444 Good 101.444444 Good mg/L < 600
Trihalomethanes 0.051571 Good 0.051571 Good mg/L < 0.25
Turbidity 0.369509 Good 0.369509 Good NTU < 5
Zinc 0.007417 Measured 0.007417 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.