Gormanston vs Queenstown

Side-by-side tap water quality comparison

Gormanston, TAS

Quality Score

Supplied by TasWater

Queenstown, TAS

Quality Score

Supplied by TasWater

Share this page Twitter Facebook LinkedIn

Which suburb has better water?

It's very close! Gormanston scores 9.6/10 and Queenstown scores 9.6/10. Both suburbs have similar water quality based on ADWG compliance data.

As an Amazon Associate, WaterScore earns from qualifying purchases. We may also earn from other affiliate links on this page — this doesn't affect our recommendations.

Visual comparison

HardnesspHFluorideChlorineTurbidity
Gormanston, TAS
Queenstown, TAS

Key metrics comparison

Full water quality comparison

All parameters compared against Australian Drinking Water Guidelines (ADWG)

Parameter Gormanston Queenstown Unit ADWG Guideline
Alkalinity 29.5 Measured 29.5 Measured mg/L No limit
Aluminium 0.02125 Good 0.02125 Good mg/L < 0.2
Ammonia 0.0025 Measured 0.0025 Measured mg/L No limit
Antimony 0.001 Measured 0.001 Measured mg/L No limit
Arsenic 0.001 Measured 0.001 Measured mg/L No limit
Cadmium 0.0002 Measured 0.0002 Measured mg/L No limit
Calcium 0.85 Measured 0.85 Measured mg/L No limit
Chloride 17.25 Good 17.25 Good mg/L < 250
Chromium 0.001 Measured 0.001 Measured mg/L No limit
Colour 2.083333 Good 2.083333 Good Pt-Co < 15
Conductivity 187.5 Measured 187.5 Measured uS/cm No limit
Copper 0.0085 Good 0.0085 Good mg/L < 2
Cyanide 0.005 Measured 0.005 Measured mg/L No limit
E. coli 0 Compliant 0 Compliant MPN/100ml < 0
Fluoride 0.933333 Good 0.933333 Good mg/L < 1.5
Free Chlorine 0.660242 Good 0.660242 Good mg/L < 5
Hardness 5.666667 Good 5.666667 Good mg/L < 200
Iron 0.01 Good 0.01 Good mg/L < 0.3
Lead 0.001 Good 0.001 Good mg/L < 0.01
Magnesium 0.875 Measured 0.875 Measured mg/L No limit
Manganese 0.005 Good 0.005 Good mg/L < 0.1
Mercury 0.0001 Measured 0.0001 Measured mg/L No limit
Nickel 0.001 Measured 0.001 Measured mg/L No limit
Nitrate 0.003833 Good 0.003833 Good mg/L < 50
Nitrite 0.002 Measured 0.002 Measured mg/L No limit
pH 7.332097 Normal 7.332097 Normal pH units 6.5 – 8.5
Sodium 34.5 Good 34.5 Good mg/L < 180
Sulfate 30.25 Good 30.25 Good mg/L < 500
Temperature 13.042742 Measured 13.042742 Measured degrees C No limit
Total Chlorine 0.774167 Good 0.774167 Good mg/L < 5
Total Coliforms 0 Compliant 0 Compliant MPN/100ml < 0
Total Dissolved Solids 109 Good 109 Good mg/L < 600
Trihalomethanes 0.13225 Good 0.13225 Good mg/L < 0.25
Turbidity 0.360968 Good 0.360968 Good NTU < 5
Zinc 0.01125 Measured 0.01125 Measured mg/L No limit

Explore further

Disclaimer: This comparison is for general informational purposes only and does not constitute medical advice or professional guidance. Data is sourced from TasWater. Values shown are based on the most recent published water quality reports and may not reflect real-time conditions at your tap. Water quality can vary due to local plumbing, seasonal changes, and other factors. For specific health concerns, consult a qualified health professional or contact your local water utility. See our Terms of Use.